Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by wdelaney

  1. wdelaney

    Telnet Problems

    Ok, You da man! I am able to telnet in via the VPN using the inside address. The question is how to make this happen without using the VPN tunnel! Would you please take a look at the current config and tell me what I am missing. I need to be able to telnet in with out a vpn connection. Is that...
  2. wdelaney

    Telnet Problems

    Thank you for your help KiscoKid! Based on my config which way would you go Nat or port forwarding?
  3. wdelaney

    Need Help With TELNET !!!!!

    I am trying to let someone from the outside telnet in through a PIX 506 box. I added the ACL but they still cannot telnet in. Attached is a sample of the PIX configuration..(66.0.0.0 represents my public Ip address) Could someone Please look at this and tell me what I'm doig wrong? Please...
  4. wdelaney

    Telnet Problem

    I am trying to let someone from the outside telnet in through a PIX 506 box. I added the ACL but they still cannot telnet in. Attached is a sample of the PIX configuration..(66.0.0.0 represents my public Ip address) Please Help! no fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup...
  5. wdelaney

    Telnet Problems

    I added the ACL but still cannot telnet. Attached is a sample of the PIX configuration..(66.0.0.0 represents my public Ip address) Please Help! no fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol...
  6. wdelaney

    Telnet Problems

    I have a PIX 506 and I need to let someone telnet through to a servers port 23. There are two access list already in the PIX neither allows for telnet 23 to the server that I can see. Do I need to modify the access list? What would the command line look like? Any help is appreciated. Will
See more

Part and Inventory Search

Back
Top