Recent content by WannabeNT

I have two hard drives on my system. The primary runs Win98. Is it possible to install Windows 2000 server on the second drive?

There's a yellow question mark on one of my sound device. It seems that the sound device needs an IRQ, which is currently unavailable. The troubleshoot leads me to two options, either free the modem or the printer port. I do not wish to lose any of these ports. How do I add or find out if there...

I have two hard drives on my computer, 10gig (primary) with 4 partitions and 6gig (primary slave) with 3 partitions. Before I add in the second drive, the alphabet drives used to be C, D, E & F. I realized that the alphabet drives changed when I first add in the second drive. Now, the first...

There is only two computers connected to each other, server and workstation. Is it possible to install BDC on the workstation over the network?

I have a machine running both win98 & NT workstation. win98 sits on the primary hd while NT workstation sits on the primary slave. An internal modem was installed and win98 recognized it and installed it on com 4 port. However, NT could not point to the same com 4. As a matter of fact, it...

I have NT4 server connected to a win98 machine. They both can share files through Network neighborhood. I've added win98 on the NT4 as a user and I could see it under the server manager. But it didn't recognize the machine under auditing. Is there something that I need to config win98 machine to...

Thank you all for your input. I reinstalled NT server and this time the nic was configured properly. (ejstrom was right about the nic). Now, both machines can share files through the network neighborhood. My next question is, can NT server audit a win98 machine?

So, I went to the server manager on NT 4 server and try to add new user but as soon as I opened the server manager window I got this window saying "No domain path was found. Would you like to find or create another one?". I don't know what that means cause the domain was created on the...

I have an NT 4 server machine and a Win98 machine. I have been trying to make them see each other. Each of the machine has a NIC with a crossover cable connected to it. I used the IP address (123.123.0.1) for the server and (123.123.0.2) for Win98. The Domain name on both machines are the same...

I have installed Windows NT server on a Compaq Deskpro.(PII 266, 64MB Ram, 6 gig hd, 12x cdrom, Compaq Netelligent 10/100 TX Embedded UTP controller (built-in network card), ESS 56K internal data fax modem & Matrox video card). During the installation, the network card and the modem were not...

I have just tried the first time installing NT Workstation on my Compaq Desktop. Now, I like to install it with NT 4 server. How do I go about uninstalling NT Workstation?