Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by walterilmago

  1. walterilmago

    BCMS Vu Server - Trying to Locate a Naming Service

    Hi. I have the same problem....and your solution can't solve it :-(
  2. walterilmago

    S8720 with old Definity G3Si

    ...and BCMS License will be on G3 or I can remove them ? Thank you
  3. walterilmago

    S8720 with old Definity G3Si

    THank you for your interest. V8 can't have IP trunking. Both PBX will be in the same place, I don't have problem in this with Point-to-point. My problem is , buying a new PBX (and NOT Updating the old one), that I want continue to use the G3 and I want integrate him with new one. In this...
  4. walterilmago

    S8720 with old Definity G3Si

    Definity is a "G3 Si V.8" and new PBX will be an Avaya Communication Manager 3.1 I hope this is the answer for your question.
  5. walterilmago

    S8720 with old Definity G3Si

    Thank you ! What's the difference from Qsig and T1 point to point ?
  6. walterilmago

    S8720 with old Definity G3Si

    Hi ! I work in a call center. I'm "buying" a new S8720 Media Server (with G650 Media Gateway). I have in office a Definity G3Si. Do you know how I can connect my old PABX with the new one ? I would continue to use my old PABX (that have 8 DS1 with 8 pri). Thanks
  7. walterilmago

    Adding a Station to a trunk

    Hi Nkook, thank you very much for you answer. I have configured my ds1 like your image and the station is ok now: the internal number ring, and when I disconnect the plug from IVR machine the phone stop to ring. This mean that link is ok, but IVR vendor says me that IVR can't receive a non-isdn...
  8. walterilmago

    Adding a Station to a trunk

    thank you for your answer. I sconfigured the trunk as you write me. I added a new station type DS1FD with port 01b16XX (where 01b16 is DS1 Board tn2464 )and now if I call the station I listen rings. But IVR not answer: I think that is an IVR problem. I will inform you on case update. I hope that...
  9. walterilmago

    Adding a Station to a trunk

    Hi. I hope i will be clear. I have a DS1 into my Definity G3Si. I have dedicated this board to "Phones"IVR. The link IVR/board is OK. The Phones Vendor tell me that I must configure a station for testing IVR. I have created a trunk with all 30 channels of DS1. I have created a station...but how...
See more

Part and Inventory Search

Back
Top