Recent content by VosnMike

Just for starters here are some examples. show ip circ show ip stats summ show process mem total show sync stat show hard slots show sycn rx_errors circ show stat all get interfaces.2.1.5.* show csmacd state Have Fun Enjoy

I have device in my Baystack 150 nmm Hub that I suspect is causing a lot of collisions on the hub. How can I monitor that port from the Hub to see when this problem happens. How can I norrow the collision to a specific port. I am not local to the hub. I have a ASN router on the network, I know I...

What utility can I use to send config files to a ASN or BCN while connected to the console port.I use hypertem it send the txt config info to fast and the router reports invalid config errors. I have used Tera Term Pro but I don't like it you can't customize its limited. Any sugestions.

Is there a way to clear the circuit error counts without rebooting the router. When I do a >show sync stat ( T1 )and see the recive errors how can I clear it to get a clean base line for trouble shooting a bad circuit. I know you can clear counter when using Site Manager but I an using BCC and...

Thanks pp8K, but clear sync stats did not work.

Is there a way to clear the circuit error counts without rebooting the router. When I do a >show sync stat and see the recive errors how can I clear it to get a clean base line for trouble shooting a bad circuit.