Recent content by vjimeneztenas

Good afternoon, I need to do debuging in one of my IPLU but I could'nt open the debug port in the IPLF, Alex says and I quote "Connection to the debug port is done via telnet (port=1500) and to access the Linux shell port 23 is used (telnet default port)" but port 1500 fails to open, does any...

I'll follow that, your right. Thanks

I have a dead system and I have to make the INL from niux, I know the parameters for 128 and 256 ATA Flash but I don't know for 512 that happen to be the only one I got. so, for example I know For a 128mb flash with syssubfs11 & syssubfs21 ( 60MB each ) mkfs /DEV/AT01 3c00 3a98 0100...

Hello All, Friends, some body have the ".PCM" files (command Form motor) for MD110, in my winfiol I have AXE's command Forms only. If you have the original Installer, better Thanks

Jinjin if you need long distanse the best is use the "DLR-3" - Digital line repeater you can fine information in ericsson web page www.ericsson.com

How many mts. do you need?

Hi jay944, before restar the lim I did what you said "1> diss of all lines, and stick a digi phone on there, is there DT does it work ??(it work), retsart card and prog unit again 2> sfcei switch (but I did it after block, unjack and refit) 3> block card/unjack card refit restart un...

Hello all, this is vjimeneztenas I solve it, but I did a RFRLI:LIM=1; that is not the best way, but it's work. THANKS TO ALL

Shaun123 and md110user thanks, but the problem continue, other suggestion.

shaun123, this is vjimeneztenas see this: SUdip:dir=3426; DIRECTORY INFORMATION AT 10:07:58 16JUL03 DIRECTORY NUMBER : 3426 TYPE OF DIRECTORY NUMBER : DTS NAME : Lopez Gustavo EXTENSION TERMINAL DATA EQU TERMD ADN CALALT 1-2-32-15 0019 1...

rorni, This is Virgilio, I did the RFPUI:LIM=1,UNIT=klp1t1; and the problem is the same. the SPEXI show the extension lake FREE

Hello all: Please help me on this: I have a BC10 an when I try to make a <ksexc:dir=3426,equ=1-1-20-13; the answer all time is NOT ACCEPTED EXTENSION IS BUSY but the extension is not busy, see this: <Ctcop:dir=3426; CALL TRACE FROM-CON EQU L>GS-EQU GS>L-EQU TO-CON...

Hello, I can't understand, please write more clear or in Spanish if you can do it

Hi, you can do it and I can help you. tell me you want re-routed all your calls to the PSTN over the private network or only some calls? I need see that: nadap:numtyp=ed&lc; lcddp:tab=dnt1; lcddp:tab=dnt2; lcddp:tab=fdt;

Tell me what kind of cisco and IOS version you have, maybe I can give you a configuration for the cisco and the PABX