Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by vantandem

  1. vantandem

    VIO server version 1.2

    We have implemented two VIO servers that mirror each other. Not too sure what sea is?
  2. vantandem

    Disk Array Controller Failure in p650

    You have to provide a bit more information. You need to narrow it down to either the Fiber-Channel Card, or the Array that resides on the FastT. If you log into the FastT through the management GUI, then you can at least eliminate the possibility of it being on the SAN. Once you have ruled...
  3. vantandem

    SAN storage disk

    Once you remove the hdisks, and the dar then the dacs, run cfgmgr. Next try to import the volume group. If you can remember which VG is on a disk then try to import the VG.
  4. vantandem

    moving disk from one fast600 to another.

    Yes you can, there are some things you have to do on the destination FastT600 server to ensure the config stays in tact on the arrays.
  5. vantandem

    Cannot see drives via fiber on a M80

    Are you sure you have all the file-sets for the Fiber device as well?
  6. vantandem

    Maintenance level

    It’s best to gout to IBM’s website to pull down the latest PTF’s. Yes, you can back out of maintenance levels If you only APPLY the changes and not COMMIT. You may want to try to run an alternate install. This will allow you to clone your rootvg and apply the changes to the copy and keep the...
  7. vantandem

    NIM: Install 4.3.3 on p610

    We have experience some issues with the P610 SCSI disks. Check to make sure you have this FRU number 09P4447 and ROS ID at 43353042. We had all of our SCSI disks replaced.
  8. vantandem

    Change media speed w/o rebooting

    I’m assuming you mean your Ethernet connection?
  9. vantandem

    NIM error, fishing for clues

    Do you have a /usr/local directory in your current environment? If you don’t this is the cause of your problem. When you move to AIX 5.1 it uses /usr/local as a working directory. /usr/local cannot be a link either. Let me know….Vantandem
  10. vantandem

    6h1 server .vs. EMC symmetrix RAID

    1. Yes, 433 can be installed on a 6H1, but it must be at least at maintenance level 10. 2. They should be able to communicate with each other 3. Don’t know. Sorry
  11. vantandem

    nfs problem

    Check to make sure you select to mount the directory when the server restarts. You can find this by running smitty nfs and check the characteristics of the NFS file-system.
  12. vantandem

    p630's DLPAR ?

    Have you ensured all firmware has been updated to the latest?
  13. vantandem

    NIm restore hangs on 608

    Are you still having this issue?
  14. vantandem

    boot from RAID disk on AIX 4.3.3

    I believe it is possible, but IBM does not support it. I believe that the SSA adapters are bootable. One way to find out is; if you boot in maintenance mode it will search a boot device, if you see your SSA address scroll by then it may be possible. Just test it.
  15. vantandem

    disk array

    In AIX the Raid subsystem is better handled through smit. Smitty ssaraid.
See more

Part and Inventory Search

Back
Top