Recent content by USADOL

Thank you everybody, we fixed the problem by disconnecting the main power source for about 30 seconds and it cleared the telephone lines. Apparently our lines were stuck in a conference mode.

Now all 4 outside lines are jammed! All 4 lines read "Line in use" when the button is pressed, so now I cannot get an outside line or dial tone. I can get a dial tone if I press one of the two intercom buttoms, but when I try to dial out I get a message stating "No free lines" and a busy signal...

Hi Hawks - it is definitely T1! Any thoughts or ideas on how to clear the jam?

Thanks bigcat919 for your response. I know which lines are stuck by using the *0 feature, however, I have no idea how to "dis-enable the whole T1 circuit, then re-anable it." All I have access to is a telephone and a wall jack! Any other solutions?

I unplugged the telephone overnight and when I arrived to work this morning, the lines are still locked, jammed, frozen! I tried again today (unplug the phone cord from the jack) and nothing. I don't have a "power" plug, just the telephone cord. Any help to unjam this is appreciated.

I have a Nortel, Ameritech, Meridian M7324 Model telephone that has 24 keys with 4 outside lines and two of the 4 are stuck with the message "Line In Use". Yesterday I tried to "Link", "Transfer" a call and two of the telephone lines are stuck. I cannot get a dial tone on either line. I left the...