Recent content by twertman68

yes i tried the ones on there web site and the ones on the cd which are the exact same ones.i'm think my problem has something to do with my old printer drivers hp 832c.under me i could unistalled the drivers in the remove programs window but in xp i was using the xp drivers with the old printer...

i think i read somewere something about some older motherboards having problems with memory sticks over 64mb.

who makes these hard drives.try going to there web site and see if they have any utilities to check your drive.did you use the discs that came with these drives to set them up.i had a wd hard drive one time and used fdisk to partition the drive and installed the os.i then put a new os in and...

have you tried win 98 again.it is possible something in your system may not work with win 2000.i had this problem with my modem and sound card.there were no drivers that would work right with win 2000 also had this problem when i changed to win xp.

if you can see light through the scratches when you hold it up to a light source it is clearly damaged.

i've just purchase a hp 7150 printer.it installed fine under windows me but wont installed right in windows xp pro.i get this message cannot install this hardware there was a problem installing this hardware hp photosmart 7150 series an error occurred during the instation of this device access...

the number you dial up with need to support v.92.if the number you use only supports v.90 you will be disconnected anyway.you will have to check your access numbers or contact your internet provider to find out if they support v.92 to do what you want it to do.

i had aol plus satellite installed a month ago and everything was working.that same day i started to get disconnected after a hour or 2.the more i kept using it the sooner i would lose connection.i also notice the speed was slower and kept slowing down then speeding up. i called aol several...

there is also settings in your bois which enables or disables L2 cache.make sure it is enable.i found out using windows 95,98,ME 128 megs is fine.anything over add no or little performance.with windows 2000 pro and nt more than 128 megs is better.in the future when windows comes out with newer...

all the socket celerons and pent 111 have on die L1 and L2, which means it is in the cpu itself.the celeron has 128 L2 where the Pent 111 has 256 L2.also the celeron has only 4 way L2 and the pent 111 has 8 way L2.so the celeron is not a cpu for heavy usage.if you just surf the internet and do...

when using a raid setup you are best with two hard drives the same size.it made a mirrored of the 4 gig hard drive so the second hard drive shows the same.it will read the smaller of the two and make the other the same size.also you can format the large hard drive under windows once you remove...

i would say with all the drives you have your PSU is all but drained.a peltier will take a higher watt PSU like 400watts or more.you could also hook up a second PSU if there is room in your case.

the 933 pent 111 is a FCPGA chip (socket 370)and has the L1 and L2 located right in the chip.if you have the 933 pent 111 then you have 256 L2 cache.the software may be looking for the L2 outside the cpu.you cant always trust software just look at windows it self.

can you tell us what your power supply watts is.for a system like this you should have at least a 300 watts.

if your motherboard monitors the cpu it will speed up the cpu fan as it get hotter.check inside your case for other fans.case fans can be disconnect for a short time to see if it is one of them.if the video card has a fan you can pull the card out then start system up to see if it is that.i...