Recent content by tuinmanski

If you reboot it then its possible that this happens , look at the prompt for callforward on sysload,or if you built the group and didn't data dump the switch. [2thumbsup] Hans KPN Holland

When you make a conference same happens. But there was a college for me on the customer location and he solved the problem with a new deplist. thanks everybody.%-) Hans KPN Holland

Hello when i place a call from cs1000 over sip route to a cs 1000m and i want to transfer the call to an outgoing trunk, then after the connect the vgw disconnects. does anyone know whats the problem here.cs 1000 rls 5.5 cppm Hans KPN Holland

Hello all it seems like the troubles are over now. I changed the cabling in the right direction and the problems are gone. thank you everyone[2thumbsup] Hans KPN Holland

Thanksss Hans KPN Holland

Hi What version was it. [2thumbsup] Hans KPN Holland

Hi In OTM Station Admin select the TN. Then, in menu, click Edit,Edit Specification (DROPDOWNMENU) select: SYNCSTATUS. Then in Old Value select TRN. In New Value select NEW. The click ADD and after this submit [2thumbsup] Hans KPN Holland

Thank you GHTROUT [smile] I did not read the message wel. I had the problem at a customersite, and saw that on 2 locations the connection was wrong. this afternoon I switch the cables and look or the problems are gone.When te change is succesfull I Reply again on this Post. The answer is ...

Hello Can you tell me why this problem exists. Thanxxx Hans KPN Holland

Hi Yes you can use any free number or symbol to use the speedlist for example you can make ffc ** or ffc #* Succes Hans KpnHolland Hans KPN Holland

Hello everyone [I have a question about meridian max] the problem is when i login as a supervisor in MTe or a console,i logout automatic after 2 minutes does anyone know something about this problem??? Or are there timers to set, So you logout after a specified time??? [Thanks everyone] Hans...

It depends on what phoneset you have Hans KPN Holland

Hi Atilv go to ld 2 then do stad first set date 07 04 2003 then set time 14 00 01 then do a cr(carriage return) To display if the time is right do ld 2 ttad then you see the time and date[pc3] succes Hans KPN Netherlands Hans KPN Holland

i think so look in ld 49 prt fcr cr cr then you can see al the ncos tables who you need Greetz Hans Kpn Holland

He Howi Try to change the compression on one of the phones that you are using in 711 codec and then try to call whit that phone maybe is the problem bandwidt or a firewall what makes the troubles in the rob box Greetz Hans KPN Netherlands