Recent content by tryingmybest

Since it's on delayed ring, the answering machine doesn't "hear" the ring until after the delay, so like he said it will probably take 7 or 8 rings if the machine is set to pickup after, say, 4...it doesn't hear its first ring until after 3 or 4 rings that the caller hears and other phones are...

Don't I remember reading that in some of the (maybe older) Partner systems, only certain extension ports allowed standard devices to be connected? I was going to say it sounded like you had ringing set to delayed or no ring on the extension you moved the answering machine to, but if...

Really cheap! And remember, 2 slot carrier so no room for another card, only a pc card. But yeah, we're talking way cheap. I'll have to "luck" into it. I don't care if it's used or not, as long as it fully functions. We only need the "small" card, too... Not that many mailboxes. Any...

haha... well, with no major problems in the upgrade i'm battin' a thousand. But, the voice mail did go down hill. I think it is the card, which you or someone said they thought was corrupt when I was talking about getting the AA setup. Now it doesn't let anyone enter any numbers (i.e...

Okay, I guess you were right! Rings 1 and 8 are about the only good ones, but 2-7 weren't *that* bad. They do tend to take some seriousness out of answering the phone, though... welcome to the arcade!

Ok, thanks for the tip. Checked it out. Both are pointed up. So, at least I know that isn't it. Thanks for the tip! Any others from anyone?

Let me get all of the cards in first. I'll see how it goes, then. If I still have no luck then may take you up on your offer and see what I can discover with SPM. Either that or I'll throw in the towel and list all of the parts separately on eBay or something to recover my costs. If I can...

No, don't have the 355a. I'm beginning to get frustrated. If I can't get the system up after I get the other cards in and installed I'm going to part it out on eBay and forget it.

I have a link setup to it. I'll check it out tonight when I get home and post if I have any problems....

Ok...I'll try it tonight. Then what? Remember, I have zero experience with a Legend system other than making a couple of calls with Legend phones at other places. I connect the 20L to the admin port and then what do I need to do? Is it self-explanatory on the display?

TTT: Well, I have both WinSPM and a 20L but I don't have any MLX cards for the system yet, so I can't use the phone as of yet. aussie88: Yes, it showed an "F" the first couple of times and then switched to a "c" so I assume it restarted. When I install the new card(s) for the MLX phones...

How is a board renumber done?

I am setting up a Legend System mainly for the purpose of learning how to operate it. I am piecing it together so I don't have all the modules I will in the end. However, this is what I currently have: -Power Supply -Legend Processor R7 V12 -408 card (not an MLX card, just basic) I know this...

Other input from other folks?

haha... well, since we only have 2 lines I guess one will be 1 and the other 8. I'll have to give them a try myself and see how bad they are.