Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by trtrtrtrtrtrt

  1. trtrtrtrtrtrt

    Call Pickup from Trunk

    <REG-CGWB; S3: DATA SUBSYSTEM FOR AMO CGWB NOT FOUND ON HARD DISK
  2. trtrtrtrtrtrt

    Call Pickup from Trunk

    Hi how i can pickup a call from trunk i have two system, elastix (5xxx) and Siemens Hipath 4000v3 (2xxx), connected by SIP Trunk. from Siemens, (77+Extension), Siemens extensions can pickup a call for other Siemens extension (only). 77+2xxx ----> OK 77+5xxx ----> Don't Work...
  3. trtrtrtrtrtrt

    Forwarding

    any error in COT of trunk?
  4. trtrtrtrtrtrt

    Forwarding

    <DIS-COT:101; DIS-COT:101; H500: AMO COT STARTED COT: 101 INFO: DEVICE: INDEP SOURCE: DB PARAMETER: PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI RECALL IF USER HANGS UP IN...
  5. trtrtrtrtrtrt

    Forwarding

    nothing changed, forward on active call from 2882 (flash then number)to any extinction on elastix 5xxx, ok forward from 2882 using (AFWDEXIN) and ( AFFWDVCE) return Not Possible.
  6. trtrtrtrtrtrt

    Forwarding

    change COS for station and trunk to new COS???
  7. trtrtrtrtrtrt

    Forwarding

    <dis-feasu; DIS-FEASU; H500: AMO FEASU STARTED ACTIVATED FEATURES CRITM LDME SPDC SPDI HTVCE HTFAX HTDTE OVR FRKN NIGHT COSXCD COSXKEY DCOSX COSXATND COSXT COSXDP ICPTDID HOTRCL DND...
  8. trtrtrtrtrtrt

    Forwarding

    nothing change, not possible.
  9. trtrtrtrtrtrt

    Forwarding

    *141 |. ....* ..... ....* ..... ..| AFWDEXIN |
  10. trtrtrtrtrtrt

    Forwarding

    this is current configurations +------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+ | DEV = HG3550IP PEN = 1-02-009-0 TGRP = 4 | |---------------------------------------------------------------------------| | PROTVAR = ECMAV2...
  11. trtrtrtrtrtrt

    Forwarding

    usnig ADD-ACTDA work fine, but from the extension using code *141 not work, not possible
  12. trtrtrtrtrtrt

    Forwarding

    yes i can dial the number, i can only forward to internal number on Siemens, but i cannot forward to external number or elastix number.
  13. trtrtrtrtrtrt

    Forwarding

    Dears i have two system, Siemens hipath 4000 v3 connected to elastix with sip trunk unconditional forward from elastix -----> Siemens OK but unconditional forward from Siemens -------> elastix (return not possible)
  14. trtrtrtrtrtrt

    call logs

    how to view call logs in hipath 4000 v3
  15. trtrtrtrtrtrt

    sip trunking

    ODR for this route as 1 ECHOALL 2 END
See more

Part and Inventory Search

Back
Top