Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by troymatt

  1. troymatt

    Troubleshooting Dual T1 Framer.

    Arg.... typed a lot and browser crashed!!! Thanks, I added stars. 1) I did check, but didn't really know what to search for. I got my initial answer right away... I saw I was sending the right digits. It continued until you recognized the problem. Up until then, I was learning to trouble...
  2. troymatt

    Troubleshooting Dual T1 Framer.

    I made the change to ISDN protocol, and changed the digit mods and viola, all is working. kwbMitel, thanks for the straight to the end answer, and thanks to those who helped me learn a few simple diagnostic commands that will be most useful. Troy
  3. troymatt

    Troubleshooting Dual T1 Framer.

    kwbMitel .... That is an awesome explination (I am using NI2), and i will check it out to see if I can get a call out. Thanks a bunch T
  4. troymatt

    Troubleshooting Dual T1 Framer.

    So... I tried the direct trunk access, and I can see the digits come out just fine .... the carrier is doing crazy stuff..... local calls dialed perfectly... LD still required me to put the extra '1' in and international just tells me I dialed wrong. I am sure it is a config that needs to be...
  5. troymatt

    Troubleshooting Dual T1 Framer.

    here is the first reply of what I got from our carrier: {This is what I got back from our TAC team. "Cst's calls are not getting to our network, traced and found no calls. please have cst check the dialing procedure for their equipment and retest"} The carrier for LD is Primus, can any one...
  6. troymatt

    Troubleshooting Dual T1 Framer.

    Supernova, I changed 1 digit in all posted numbers. The thing that is still messing with me, is regular LD is sending 1,1,405,xxx-xxxx and it is working, but if I dont send both "1's" the LD doesn't connect. Why does it need the extra digit there, and what could be messing up the UK calls ...
  7. troymatt

    Troubleshooting Dual T1 Framer.

    Thanks Brewski, So here is what I see: 07:38:11 RO1 DPN 24 ISRM_I ;10;*1#*50*5322#*100*Troy#*19*Z# 07:38:11 RO1 DPN 2D SSRM_I *58*CW*fwPs@@@@@Ek]g`#*58*C6*001#*58*C4*4*1# 07:38:11 RO1 DPN B SSRM_C 6169924278 07:38:11 RI1 DPN 7...
  8. troymatt

    Troubleshooting Dual T1 Framer.

    Supernova, maybe I wasn't clear. I am no longer using the ASU or the NSU since the new hardware has an embedded analog card which was all i needed (3 analog extensions and 1 analog trunk). I also replaced the NSU with a dual T1 framer because I was sick of having the NSU IMAT database get...
  9. troymatt

    Troubleshooting Dual T1 Framer.

    I recently upgraded our 3300 to new hardware and MCD 4.2. Our old setup used an ASU and NSU, and I was able to connect to the maintenence port (using ProComm) on the NSU to see what was being sent the the PSTN/Carrier. Nothing was upgraded, I programmed the 3300MXe from scratch, so I may...
See more

Part and Inventory Search

Back
Top