Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by TripleC4
-
System hangs at POST
Freestone done all that even tried connecting the primary to the secondary e.g none,none,auto,none same thing I think the onboard controller may be stuffed, but doesnt explain why it will boot with cdroms attached and not hdd- TripleC4
- Post #6
- Forum: PC hardware - General discussion
-
System hangs at POST
Its a workstation pc slot 1 with a GA bx2000 dual bios 128 memory 80g hdd (NEW) old is 10gig. HDD detection in bios is turned on and does detect the drive at post i assume at check of the IDE port. However after that the system hangs when the box with the cpu type memory etx appears and the info...- TripleC4
- Post #4
- Forum: PC hardware - General discussion
-
System hangs at POST
I have a pentium III 500 which hangs at post on detection of HDD. New HDD fitted with same issue. Disconnect HDD and connect to secondary IDE slot same issue. IF i connect the CDROM's to the IDE 1 or 2 and system tries to boot. Is this issue with HDD controller chip on the board or another...- TripleC4
- Thread
- Replies: 7
- Forum: PC hardware - General discussion
