Recent content by trbuman

I am able to run other real time reports with unicast such as "standard agent display

Thanks for the help. Here is more info. It is just the "standard nodal display" that will not work. RTD is enabled. Thanks for the help.

When I try and run a "standard nodal display" I receive the following: Standard Nodal Display Last server contact: 3/25/2010 2:35:52 PM The system could not retrieve any data from the server because either the server connection is down, or there is currently no relevant data to display...

I have a CP 3.0 system. I am getting event code 58005 SLEE- telepony exec GAM. Failed to answere the call rc=57205, tapi or ctms rc= 2147483576 # of attempts= 6. At the same time I get event code 55716, Appbuilder BRM, System error occurred in appbuilder application. Any help is greatly...

Can someone help me with the following error. 55701 Alarm Set Critical IVF-SR Messaging [14,] Unexpected value received. AppID = . GetKey$GetKey:G thanks for any help

We are not using IP phones. The phones are 3900 series. Analog sets are able to 0# out of VM. When 0# are pressed the VM greeting continues to play. Thanks for the help.

I am using CP with 2 branch offices. Phones from the main PBX location can not 0# out of the voice mail at the branch office. All other callers can. Anyone have any ideas? Thanks in advance.

We have an option 61C running succesion 3 and have a symposium server. Thanks for the help.

I have 3905 ACD phones randomly go to "busy" in the PBX. They then will not take ACD calls. Phone can make calls and receive other calls. Any help greatly appreciated. Thanks in advance.

I have 3905 ACD phones that randomly go to "busy" and then will not take any ACD calls. The phone will take other calls and can make calls. Any help greatly appreciated. Thanks in advance.

John I checked the TN's. The first 2 do not exist and the third is the TN of the phone with the trouble. Thanks for the help 004 0 01 03,024 1 01 08,020 0 09 03..those are the three tn's mentioned in the alarm, i would look at those three to see if one of them was causing the problem.. might...

Two of the TN's do not exist and the last one is the TN of the phone having trouble. Thanks again

I am receiving an AUD422 message on an option 61C. Any help would be greatly appreciated. Thanks in advance. Here is the message I am getting AUD422 006A6C4C 00000407 00000003 00001A84 00000001 00001427 00000000 3279 NULL

Thanks John. We upgraded the switch to succession 3.0 and the phones as follows: 3902 82 3903 85 3904 87 3905 87 Thanks.

I have upgraded the firmware on our 3900 series sets, 3902, 3903, 3904, and 3905. Since doing this we have spuradic troubles. Phones are forwarding themselves and when you try and conference in another person you loose the first person. Thanks for any help in advance.