Recent content by TommyT1

Nah, I don't think it is. It's two separate phones on two separate cores (20 0 5 10 and 12 1 5 10).. %-)

jimeec - That's a possibility. What's involved in taking care of that? senk1s - I already swapped out phones, after swapping out headset components. Thanks again, all.

Let me say this one more time - I've got AT LEAST 25 of these headset units working here. These two that aren't working are the first I've come across. With the headset plugged in, you CAN access the "headset" key, and it WILL grab a line. There's just no audio. Swapping headset...

HRTECH - No batteries here. I use power supplies. senk1s - I've done that already. The things work in other phones, but not these two in particular. Never encountered this before....weird..

jimeec - The model number for the amplifier is M12. All the settings are correct, as far as the switch in the side of the unit. I've used a headset that worked on another phone and hooked it up to either of the two that aren't working, and it does the same thing - accesses the line, but you get...

Forgot to mention that. I sure did...

OK, weird problem here that's never happened before... Got (2) 3904's that I'm trying to put Plantronics headsets on. When you hit the "headset" key, it'll access key 0 (or any other key you want), but I don't get anything through the ear piece. Now, these headsets are brand new...

What I did here was shut down the rectifiers, then the main power switch, then the switches in the back of the bottom core. I too had a problem with one shelf coming back up in that blackout. I think our switches must be related. LOL Good luck. Tommy

Colin - That worked, man. Thanks! I tried changing all kinds of things in the CLS, that I thought would be associated, and I couldn't get it to work. LOL Now that I have that forwarding set, how would I go about taking it off? Thank you all again. -Tommy

I tried that, but get a fast busy. :(

Can someone remind me how to call forward a 500 port? There's some sequence of numbers that you input when you go off-hook, but I can't remember. BTW, it's an Option 61C. Thank you. Tommy

We've done that already... The only fields it'll let us "CHG" are "ANAT" and "ANLD". Anywhere else we could look? Thanks for the reply, BTW.[2thumbsup]

Per one of our carriers, we are only sending out 4 digits over our PRI on the 3904 sets. Where would we go to change it to 10 or 11 digits being sent out? We're stumped here. BTW, it's an Option 61C. Thanks in advance, Tommy

According to the manual, it states only "Frame alignment maintenance limit". We've been having problems with people dialing out getting cut-off, getting recordings here the last week or so. What I need to know is if this alignment limit message has to do with the PBX or with telco (as...

Reusser - That worked. You da man! At first I was doing RLS+HOLD at the same time. Duh! lol But after a cigarette and some thinking, I tried it the way you meant it. Thanks again guys. You make me look like a star. LOL Tommy