Recent content by ToddGivens

Hi, we are in the process of moving a Definity G3 with ISDN PRI. We have a spare system we plan to temporarily put in it's place, but we would like all calls forward to the existing voicemail system. There are 150 stations programmed in the phone system and instead of re-programming all of them...

Hey all, I can successfully sync with exchange on the internal network when I have the port configured as the default, port 80. To allow remote access, I need to change the port number, since we are using port 80 on a different server. When I change the port, activesync fails, internally and...

Thanks for your help. Unfortunately the ISP won't provide a block of IP addresses, so I went ahead and configured a different port for web access. I am hoping this back-fire down the road. Thanks so much, Todd

Thanks a bunch for your response, I was afraid of that. Security is the only reservation I have about opening another port. Is there a port any more or less vulnerable? Thanks again, Todd

We've got a pix 501 with one public IP address that has open ports to http, https and smtp. Both http and https forwards all requests to 192.168.0.1 - web serverA. All SMTP requests forward to 192.168.0.2 - exchange serverA. The problem is - To allow outlook web access, exchange needs to...

Has anyone successfully made a 7900 (7940/7960) series Cisco phone wireless? We are trying to use a wireless access device that provides an ethernet port to the phone. Any suggestions? Thanks,

Thanks for your help. I needed some reassurance. -Todd

Hey everyone, We are using one windows small bus server 2003 as a multifunctioning machine. We are using this one machine as a file server, exchange server, web server (iis) and sql server. To help alleviate processing power and increase security we are buying a separate piece of hardware and...

We have a windows 2003 network share that has plenty of free space available. When one particular windows xp machine attempts to copy a small file (26k) to the share, the user receives an error stating, there is not enough free space. The xp machine has permissions, smaller files can be copied...

I was afraid of that. Assumed it was either the power supply or mobo. Guess I needed a little reassurance. Thanks as always. -Todd

Hey everyone, I've been scratching my head over this one. I received an older Gateway pc to repair. When I turned it on the hard disk did not power up. No spinning, nothing. I assumed it was a bad hard drive so I replaced it with another. With the new hard drive plugged up, I proceeded to...

Perfect. Created a listed directory number, changed the auto attendant and worked like a charm. Thanks -Todd

This is an actual console (302a). Would the same apply?

The zeroed out destination is the extension of the console (8501). I do not have any TAAS options under the attendant programming. I can only program TAAS under "chan console".

Please let me clarify.... When someone calls, The auto attendant picks up, "Thank you for calling". Most will hold or press zero. At this point, when in night service, we want it to route to paging system. When not in night service, we want it to ring console. Does this help?