Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by TMorgan
-
Windows XP Pro client to Linksys BEFVP41
I have two BEFVP41 routers set up with a vpn, the routers basically set up the tunnels between themselves, then route any traffic destined for the remote internal LAN IP's through the vpn. One side runs XP and the other Win2K. Only have to add the routes to the routing table if you have another...- TMorgan
- Post #4
- Forum: Virtual Private Networks (VPN)
-
VPN ports through two routers
If you are using Windows systems, You will have to add the path from the remote VPN internal LAN, lets say 192.168.1.0 to the routing tables so that it points to the VPN's gateway IP. Other wise it will use your default gateway witch is probably your router to try and make the connection. Go to...- TMorgan
- Post #5
- Forum: Virtual Private Networks (VPN)
-
How to change TCP/IP routing table on an AS400.
Hello all, We have an AS400 on R4V4. I’m fairly new to the AS400 and in need of a little help, We have just set up a VPN from a remote site to our office and I had to make entries into the routing tables on our NT machines so that they would reroute all returning traffic to the remote VPN's LAN...
