Recent content by tmckeown

Turning off all options in the VOIP settings of the sonicwall devices and restarting the tunnels cured the problem! Whew! I hope this helps someone. Things turned off: H323 transformations Consistent Nat SIP

Hi, In the last couple weeks, I am having trouble with IP phones connecting over the tunnels. Here are some specifics: IP Office 412 running 3.2 (69) (7) Tunnels to our main office (all are Sonicwall Firewalls) Each location has an Avaya 5610SW IP phone The tunnels are all functional and the...

I had the wrong password!! Doh! All working now.

Working directory is C:\Avaya\IP Office\Manager The ip412.bin file is in that directory already. I must be missing something. I've done this before. I can't understand why it's not functioning this time.

Hi, I have an IP 412 running 3.2 (69). All my device modules are running 5.2 (69) so everything has been fine... until we had a failure in one of our Analog Pots8+ modules. I bought a refurbished on and it comes up with 7.0 (26) as its firmware. I try to do the update but it fails. Is there some...

I will be holding off on the new phone system for a bit. In the meantime, I'd like to readdress the original question. Is it possible to have VM Pro 3.2 (65) on a Windows 2012R2 server? I know the software is very old and I should upgrade the entire system, but that would also require me to...

Thank you so much for all the clarification. I really appreciate all the help I get here.

Ok, so only the phones could be reused. Can these other things work still? Voicmail Pro config - can I export and import the config file into the new version of VMPro? Will SCN still work to other sites that have IPO406 units? Can I import the config file from the IPO412 or do I need to start...

Sorry for the typos. The phones we have are the 5410, 5420 and the 5610 IP phone. I have (5) digital stations, (2) phone units and (3) Analog trunk units and (2) PRI cards in the IP412 unit. Is there any of this that could be kept if we went with the IPO 500 series?

Hi Joe, That is a possibility. Are 5410 and 5520 phones compatible with a IPO 500 V2? Are all the expansion modules we currently use with the IPO412 going to work, or is it a complete system change. Just trying to get a handle on it.

We have a functioning VM Pro 3.2 running on Windows server 2003 (32 bit). I'm trying to retire all our old, unsupported servers and wanted to install VM Pro 3.2 on a new server. We have licensing for Server 2012 R2 (64 bit) so I'd like to install it on that. Does anyone know if it's possible? My...

as a followup to this thread. I did get the VCM and installed it. The SCN is working as expected now. Thank you all for the help!

Thank you guys so much for the help. Per Monitor, it looks like there is no VCM installed. VCOMP=0 I will get one ordered today.

Thank you SOOOO much for the helpful replies. This is such a great forum! Is there a simple way to check if there is a VCM in the IP403 without taking off the cover?

I can give that a shot, but completely turning off the firewall didn't work either on Server 2012R2 Thanks for the suggestions