Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by tiver43809

  1. tiver43809

    CDR From a Session Manger

    Thank You We ended up doing an SFTP collect task.
  2. tiver43809

    CDR From a Session Manger

    thread690-1782228 Is it possible to setup RSP on a session manager? If so how? thank You Terry in Telcom
  3. tiver43809

    SV9100 SMDR/CDR Internal Calls

    It is a SV9100, it is outputting CDR in an older format.
  4. tiver43809

    SV9100 SMDR/CDR Internal Calls

    It is SMDR, it was formatted in the post which is why I added the file so it is parsed correctly. For a KE means it's an inbound call, KA or KH outbound, etc. And then depending on the position it has Source Trunk Route, Source Trunk Member time of connection time of completion if there are...
  5. tiver43809

    SV9100 SMDR/CDR Internal Calls

    In raw call records I don’t see any KB or KJ records. Do I have to enable something on every extension in order for it to output internal calls to SMDR or is that a global setting and where do I find it? I have included a sample of the CDR I am sending to a buffer box and the way it comes out...
  6. tiver43809

    Centrex 200

    I wasn't quite sure where to post this, there isn't a Centrex forum. I searched but did not find anything close to this question with Centrex. In the SMDR I am not seeing any inbound calls. We have made test calls and nothing. I connected to a Scannex buffer box and tried again using Live Record...
  7. tiver43809

    SMDR

    Thank You everyone, the end user was trying to use our AvayaRsp to collect. Jeeze Louise
  8. tiver43809

    SMDR

    We are trying to configure TCPIP SMDR output. We had to use port 8000. When using telnet from server we are pushing to it can see it. However we are unable to collect. Someone told me if you have IP issues configuring SMDR output you might have to reboot the IP Office. Is this true? I can't find...
  9. tiver43809

    CS 1000 DBA CDR/Traffic Collector

    Hello Ever since we started using the DBA Tool Kit I get some IO errors out of the pbx. It says Data Collection Equipment has disconnected from the network. Then I will get one that says Data Collection Equipment has reconnected to the network. I don't get very many a few times a day is all. We...
  10. tiver43809

    E at end of digits dialed in some cdr records

    Thanks for the info once again Tek-Tips ROCKS
  11. tiver43809

    E at end of digits dialed in some cdr records

    It is in the digits dialed field. But only happens once in awhile and it is always an international call. they are valid phone numbers so I am not sure why it shows up. Nothing has been changed. Thanks for looking
  12. tiver43809

    E at end of digits dialed in some cdr records

    I am getting an E at the end of digits dialed for some international calls. I have found same phone number without the E. Does anyone know what this is? Our Call Accounting System does not seem to like it. Thank You, tli
  13. tiver43809

    CDR's via Hyperterminal?

    You could do something sneaky and contact a vendor and ask for a trial. The only one I know is ISI Telemangement Solutions. I am sure there are LOTS of them out there
  14. tiver43809

    Sorting Text

    I have been doing this first in DOS Edlin, then Edit Then in Notepad for.... Yes you can see how many years. WOOT Thanks
  15. tiver43809

    Sorting Text

    I don't know much about scripting. I am trying to sort a text file from the last couple of digits of each line. I have gotten a sort to work (kinda) I ahve included the script I have been working with. And at the bottom a small sample of data. Now this sorts my file, but how would I go to the...

Part and Inventory Search

Back
Top