Recent content by tighttuk

yes the A.A. does ring the ext. before going to voice mail and I even removed the ext. from the V.M. group and the ext. just kept ringing. I also set remote access non tie line to unrestricted with no luck

I already have the V.M. set up for trunk to trunk transfer and the V.M. notification works (it will grab a trunk and call to outside number)and also has no restrictions .Whats puzzling me is that I have another exact same switch programmed this way and it works fine the only difference is that...

I am including the print display hopefully this will help and I am sorry about the cap locks also the ext. has v.m. box thx A Extn SS/PP Type A 14 1/ 5 4412D+ A CTI Link : No Alarms: ACTIVE A Pool Access : 70 A Page Group : A...

INCOMING CALLS ANSWERED BY THE A.A. AND THEN TRANSFERED GO TO V.M. INSTEAD OF FORWARDING TO OUTSIDE NUMBER AND WE DO NOT HAVE D.I.D.'S ALSO I HAVE SET UP THAT EXT. TO HAVE REMOTE FORWARDING AND TRUNK TO TRUNK TRANSFER AND WHEN CALLING THAT EXT. FROM ANOTHER EXT. YOU ARE ABLE TO FORWARD TO A...

I HAVE A LEGEND MAGIX 2.2 SWITCH W/V.M. THE PROBLEM THAT I AM HAVING IS THAT WHEN CALLING IN AND YOU ARE TRANFERED THRU THE A.A. OR THE RECEPTIONIST IT GOES TO THE V.M. INSTEAD OF FORWARDING OUT TO CELL, AND IF YOU CALL FROM ANOTHER EXT. IT GOES OUT TO THE CELL PHONE PLEASE ADVISE THX JOHN

I WILL TRY THIS AND SEE IF WE CAN GET THIS TO WORK .I WANT TO THANK YOU AND EVERYONE ELSE AT TEK-TIPS FOR ALL YOUR HELP AND THANKS AGAIN

I HAVE A LEGEND R.3 V.7 WITH A T1 CIRCUIT THAT IS SET-UP FOR D.I.D.'S WITH 1 COPPER TRUNK ON 801 AND THATS IT . HERE IS MY ?, HOW DO I GET IT TO CALL A CELL NUMBER WHEN SOMEONE FORWARDS FROM THERE EXT. TO THERE CELL PHONE AND IS IT POSSIBLE. THERE IS ONLY 1 PERSON AT THERE LOC. THAT IS ABLE TO...

I already checked for rotary enabled and those ext. are rotary enabled .So when they went from a MLM 007 voice mail to merlin messaging they will not have that feature is this correct.

so if there using legend phones this feature will not work ,cause the customer said that they had this feature before and that it just stopped working

yes merlin messaging 2.0 legend carrier

my problem is when there is a message left at an extention the message waiting light lights up but the phone will not display how many new messages there is or how many old messages

I have tried that but it does not want to take it ,it is such an old system that I can not find any literature on the subject

how do I assign a voice mail button to a mls phone the normal way would to be in the programming mode you would have to hit the button you would like to program then hit the left intercom then 777 but this is not taking and I have looked every where for a procedure with no luck please help...

I have a magix switch R2.1 V8.0 with merlin messaging R1.1 and the switch is set for the key mode , my problem is that I want the lines to ring at least 4 times then go to the auto-attendant, I know how to set the delay up in the pbx mode and that works fine but I am having trouble understanding...

HOW DO I GET THE A.A. TO ANSWER AT NIGHT ONLY THEY DO NOT NEED IT TO PICK UP DURING THE DAY IT IS A MERLIN MESS. R.2.5