Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Tier2_Maracaibo

  1. Tier2_Maracaibo

    IP TRUNK H.323 AVAYA CM 5.2.1 AND ERICSSON MD110

    HELLO, I HAVE A PROBLEM WITH H.323 IP TRUNKS BETWEEN AVAYA CM 5.2.1 AND MD110. THE TROCALS ARE UP AND THE CALL IS PERFORMED BUT I DO NOT HAVE AN AUDIO BETWEEN THE 2 TEAMS. EITHER THE CALL ID WORKS.   I HAVE 2 CLIENTS WITH AVAYA CM THAT NEED TO CONNECT AGAINST THE SAME MD110. ANY IDEAS? VI...
  2. Tier2_Maracaibo

    Ringer volume doesn't keep it's value (4602)

    ok, update phones to 2.9 sp1 and change the 46xxsetting as indicated results when I have them notice thanks to all
  3. Tier2_Maracaibo

    Ringer volume doesn't keep it's value (4602)

    is true, the Manager of IPO has a TFTP Server. this case is focused on CM 3.1.2 However, this issue is related to the 4602 specifically, so it also affects IPO
  4. Tier2_Maracaibo

    Ringer volume doesn't keep it's value (4602)

    thanks for replying, this is one of the options that I'm driving, but the client does not have a TFTP server and I install it on the laptop Tomorrow I should be doing these tests
  5. Tier2_Maracaibo

    Ringer volume doesn't keep it's value (4602)

    I put this thread again, as the former gave no final answer http://www.tek-tips.com/viewthread.cfm?qid=1067448 IP 4602 are about 25 + who are presenting this problem. when spending time with no activity, low ringer volume to a minimum audible. I'm thinking it is a firmware problem (2.3) of...
  6. Tier2_Maracaibo

    Restrict traficc for MAC Address

    I have 3 VLAN, VLAN 1 for Management, Vlan Vlan 2 for 3 for Data and VoIP. Voip is AVAYA IP Phone 1608 with MAC which is 00B4-4fxx-xxxx. I need that 3COM 4500 switch ports where IP phones are placed only accept AVAYA devices. I wanted to create an ACL rule that filters the traffic but not how...
  7. Tier2_Maracaibo

    S8510 G450 status license is Serial Number mismatch

    S8500 Server, G250 Media Gateway, CM: The status license is Serial Number mismatch Document Id: KB01076980 Last Modified Date: 06-10-2009 Support Goal(s): Communication Manager, G250 Media Gateway, G350 Media Gateways, G450 Media Gateways, S8500 Server, S8510 server, S8700 Server, S8710...
  8. Tier2_Maracaibo

    Link Down

    from a few days ago that I was presenting the same problem. "Achievement solve it? What did you do?
  9. Tier2_Maracaibo

    Loudspeaker Paging

    I have a S8300C IN AND G700 need to put a channel for Loudspeaker Paging. As I logged in to paging? Configured as an extension analogy? I have no idea
  10. Tier2_Maracaibo

    IP Office in Continuous Reboot

    SSMaterials, exactly what you did? I have the same problem that you (by the image of the viewer is the same). As arranged?
  11. Tier2_Maracaibo

    LINK MD110 BC8 AND AVAYA S8300

    Thanks for answering, E1 CAS is with MFC R2 signalling, as far as I understand, but also need to know the details of the trunk group, if type tie and what kind of signage at the trunk has MD.
  12. Tier2_Maracaibo

    LINK MD110 BC8 AND AVAYA S8300

    Boys and girl, I need a favor, I am setting up a link between MD110 BC8 and Avaya S8300, 1 E1 (must be type tie) currently are MD-MD, but we will migrate one of the MD. Parameters of MD are either difficult to understand and do not have staff on hand Ericsson tell us that we need to do...
  13. Tier2_Maracaibo

    analog trunk no ringing en IPO 406V2 3.2 (17)

    My trunk line are equipment TELULAR (CDMA wireless trunk). The IPO is not detecting the ring of the lines. IPO 406V2 3.2 (17). Previously we had 3.2 (59) and ringing well, but was producing problems since the trunk stayed retained and I had to grade down to 3.2 (17) And change the locale...
  14. Tier2_Maracaibo

    Message: Device Status: GigabitEthernet 1/0/1 send failed

    Just need to be made to release the update on March 2 annex note of release. 2.10Web Interface In past software releases, users were unable to change the ”Power Max” value for individual POE ports. This has been fixed. If an SFP was inserted and there was no physical link to it, the web...
  15. Tier2_Maracaibo

    Remote access using a DID, 406V2 with embedded VM

    You must create a route to destination blank for the incoming calls did go to the extension is correct. The RemoteUser just what to create in the SAR with the same password that the user creates
See more

Part and Inventory Search

Back
Top