Recent content by tiash

Would anyone have the steps to configure a netopia R910 to connect to a TZ170 sonicwall router using IPSEC 3DEs HMAC SHA1 IKE.

I would like to know what are the pros and cons of using either the root hint or the forwarder and what conditions should either one be used. I've been setting up most server using the forwarder that goes to the ISP DNS server. When should I use the root hint and why? I've read the Microsoft...

???

Does anyone know how to force the back up to go through without prompting for permission to overwrite the tape.

DOes anyone know how to have the Windows server backup to overwrite media with out prompting for a yes to overwrite. I would like to automate my backups.

The connection has a bandwidth related to to maintain itself. Term services a good gauge is 20 - 30 k allocated per connection. I'm curious of the additional overhead required for a vpn connect. PS Terminal services allows for use through a low bandwidth environment on 128 k i've run term with...

I have a 128 K pipe how many tunnels can be used and what are the restrictions.What is the minimum bandwidth required to maintain a VPN tunnel. What factor the applications taht are being used effect it.

The ip and the gateway should be the same. The mask should be 255.255.255.255 Do a route print and let me know what it says

You are still not clear if you're main office is where the cisco 2620 router is loacated and that is what is the vpn router then pptp passthrough and ipsec is not the issue on the linksys router. The cisco needs to have the listening port 1723 and GRE available and have the capabilities of...

The solution is to go to the properties of the network connection. choose tcp/ip in the properties choose advanced and the is a selection for using default gateway uncheck this box. When you are connected to the vpn it is forcing unknown ip to resolve through the default. unchecking will allow...

You should still be able to resolve names even if you are not a part of the domain or workgroup.

Please be alittle more specific. If you are using the router as a vpn server then the linksys has a problem with multiple connections. The netopia router will allow you to configure 6 vpn connections to the router. Another thing that you do is allow the vpn ports to pass through your router and...

If you've added any filters on the connection, remove them and try browsing then . I fyou are using the older OS run WINS on the server to resolve names over the vpn.

How do I disable users from accessing server domain when they login to network as a work group.??

If you were able to authenticate with the Win 98 client then your tunnel is fine. You will not be able to browse the network with the network neighborhood. Try to ping the IP of the server once the connection is made. to use the network neighbor hood you have to enable netbeui on both sides to...