Recent content by ThomasLiss

All you need for completely restoring a portal with all the content (any subsites etc) is the three databases _PROF, _SITE and _SERV. You can restore a portal after reinstalling SPS (happened to me) by choosing "restore a portal site" and manually giving the names of these databases. Before...

Hi there, On our SPS Portal, we have two content indexes, Portala content and non-portal content. The non-portal content index is indexing in the internet, especially the microsoft web sites, although I deleted all sources in it. Right now, I stopped the update and reset the index. But I have...

Sorry, I am not very experienced in this. If it is a signaling problem, does that mean a problem with the codec? Thanks, Thomas Liss

Thanks for your answer. We don't use PRI, we have BRI (ISDN) in Germany. When we hang up the dialed phone, the call is terminated. Same when caller hangs up. We are H323 to CCM. Best, Thomas Liss

Hi there, I'm trying to forward all calls to my ip phone to my phone at home. I use CallForwardAll on my 7960 with CallManager 3.3 and a Cisco 1760. This works fine when calling from another ip phone. I am forwarded to my home phone and can talk. When an external caller calls my ip phone, he...

Hello, we are experiencing unexpected call droppings, always after exactly 176 seconds. This only happens with calls from VoIP to a Panasonic pbx 1232. Calling from VoIP anywhere besides to the pbx, (mobile phone, other outside line), this does not happen. Might it be something with the pbx or...

Thank you! These settings apply to the external lines of the pbx. This problem is with an internal extension. Are these times maybe also configurable for the int. extensions? Best, Thomas Liss

Hi there, I'm not sure this is the right forum, but since only the panasonic pbx seems to produce the problem, I'll try here. We have a panasonic kx-ta308 connected via analog voice card (FXO/FXS) with a cisco 1760. The problem is that when you place a call and hang up the phone, the line...

Hi everybody, thanks for all your help. I finally figured out that in order to display the complete number, incl. extension, I have to leave the field "external phone number mask" in ccm config blank. I put the base number there. Don't know why, but without en entry there, it works. Thanks...

Hello, we have a cisco 1760 connected directly to an NTBA (Germany) for VoIP. Working fine, but the extension is not being displayed on the called phone, only the base number (247044-0). Clid is allowed on this line from our Telekom. On CCM, everything I can think of is set to allowed...

Just found this on Cisco. I'm getting free line now. Thanks anyway, Thomas -------------------------------------------------- In Germany (and possibly in other countries), local telephone companies offer an ISDN line called "Anlagenanschluss". This line, or very often a "hunt-group" of...

Hi, and once again I'm trying to find help here from the experts. The ISDN line that our router is connected to with the ISDN interface has changed from PTMP to PTP. I thought that adding "isdn protocol-emulate network" to the config of the ISDN interface would take care of that, but it...

Thank you, I think that will solve the problem. Regards, Thomas

Hi all, I am wondering if it is possible to have IP Phones reachable under two different numbers. Our router (1760) is equipped with two ISDN interfaces. One connects to the internal pbx and one directly to NTBAs to call outside. When calling internally from the pbx to ip phones, the numbers...

Hi, Thanks again for your advice. I changed the dial-peer to what you suggested. That didn't help, but it couldn't have. PBX guy just called me, he did "some changes" to the configuration of pbx, now everything is working again. Kind of reassuring. :) Best, Thomas