Recent content by ThePhoneGURU

Thanks for the information, I will have to go back to site and investigate further. I will bring my laptop and connect to the cp100 and see how things are set up.

Also, I've left some test messages today in mailbox 50 and it has been paging the pager even though it's before the start time that I entered

Hello All, Have a client with a CICS 6.1 and CP100 3.0. I programmed the system some time ago whereby after hours 5pm until 8am people calling into the system getting a greeting that states for after hours emergency press 50. This goes to a mailbox on the system that has msg notify option to...

Hi All, Sorry, I should have mentioned before, I had customer unplug phone set but did not fix. I can try and reboot the phone system to see if that changes the state of the flashing. Not sure what is causing it.

Yes both extensions have personal mailboxes. I have confirmed they both have no messages in there mbox.

Hello All, Nortel CICS with Startalk Flash, I don't have the current versions at the present time. I was asked to make some modifications to phone system programming and voicemail. After these changes, both the 2 T7208 Handsets now flash as if there is a message waiting however there is no...

Hello All, One of my clients called and stated their 3x8 Power Supply was making a large buzzing noise. We shipped out another power supply to the customer and they plugged it in, this seemed to fix the issue for 3-4 hours but they later called back to state this new power supply is making the...

Thanks biv343, I wouldn't know the first thing about running the universal profile etc. It may go back on the shelf until I meet someone like yourself. Lol Thanks again!

Hello, Thank you, all lights flashed green on power up. I just wanted to be sure I wasn't missing something simple. Thanks for your response, I will work on this further...

Hello All, Inherited a BCM 200 3.6 Build 2.2c from a client that went out of business. Intent was to install for another client. Original system had a T1 Module and DSM32. The T1 module was replaced with the CATM8 analog trunk module and the hole system was tested working about 1 month ago...

Thanks everyone, This is my first time putting one on an Ipo, I've never had this sort of error on the bcm or mics/cics. The solution worked fine for 8 months. Just frustrating. I guess I'll have to go the analog cordless route

Error Message on 7406e Phone says talkmode incompatible

I don't believe there is a firmware upgrade for the phone. The release for IPO is the latest.

Hello All, IPO 7.0 with Nortel TCM Module and a T7406e attached. It was running fine for 8 months and then problems occured with handset saying intializing or going completley dead. Replaced the battery on the T7406E which seemed to work for 2 weeks. Then went back to initializing again. My...

Hello Thanks, Heading to site now, yes all phones need to ring too