Recent content by tesleeds

Thanks for the reply. I will try that.

If we have a door entry unit attached to an analogue extension port on an ELUA card. If it is in use and the door calls and is answered by a digital extension, say a Dialog 4223...This user then presses 8 on the keypad to open the door. Question is - will it work? Does the digital extension...

Yes, Additional licenses added.

I have a NCP500 running 8 x SIP trunks ok + 25 digital extns. I want to connect a SIP doorphone unit where I will need to send DTMF back from the SIP device to open a door relay. Installed 4 x SIP activation keys = OK Set up 1 x SIP extension EXT 222 to simulate the SIP doorphone. This is...

Cancel this thread... incorrect entry.

Is it possible to set incoming calls in night service to go direct to a mailbox to play a message like " the office is now closed... please leave a message" Currently have port 07 and 08 attached as APT connection These are analogue CO lines. Thanks

When a subsciber collects a voice mail message - By default it will tell him the time it arrived and the callers extension number(if internal). I believe this can also provide the date the message was left as well as the time. Where can I change this setting? Thanks.

Thats good to know, I am now aware of the programmable keys setting. Thankyou.

Question is - Will a Dialog 4225(DBC 225 02/01001 R2A) work on a BP50/250 using CPUD4. Or is it only the 4222/4223/3213 etc that can be used correctly?

Upgraded to Ver5.1 and it did not clear the fault. Still froze.I had to fit a temporary Panasonic KXTD for he customer, because it is effecting the business. Have just fitted a replacement CPU today, (upgraded this to 5.1 also) and see how that goes. If it stays up for 24 hours I can assume...

Yes, Hope to upgrade early next week. I will recheck the ME 50 card too. One thing that puzzles me..... On the front of the CPU there are 5 LED's 1 = Green Flash =ok 2 = Steady Red 3-5 = Off This 2nd LED comes on straight away, as soon as it boots up under normal working conditions.

Have just installed a Ver 4 SV8100 with ME50 Card/InMail/PRI Card/2 x 16Port Digital EXT Cards. Simple set up using Digital telephones only. Went live 2 weeks ago. Immediate fault..... System freezes i.e.the DT330 LCD displays shows date/time as normal on all phones, but no dial tone. Only way...

Will go back to site next week and try...

I have a DDI Number pointing to a hunt goup(391) via table 151/152 This has 2 digital extns 237 & 238 as members - set to both ring. Can I set up a voicemail to take any unanswered calls to this group? And give Message waiting Ind. I tried Intercept Routing. This has an attached TVP100 with...

I have recently installed a CTI card into a KXTDA100 ok. This is registered and working to the customer network. I got the customer to install Panasonic Tapi Driver KXTDA_tsp_inst_32707.exe onto their server. I didnt realise that their server was WIN2008 64BIT operating system as (opposed to 32...