Recent content by tellco

The full error code you're getting is as follows: Stop 0x00000001e (0xc00000005,0xbfeaed16, 0x00000000, 0x00000000) KMODE_EXCEPTION_NOT_HANDLED Address: bfeaed16 base at bfeae000, datestamp 3e25bc59 - mup.sys Basically it means that the Windows Kernal has detected an illegal or unknown...

Here's a thread with someone who has the exact same problem. It is a lengthy explaination, but they did manage to get rid of it (may have to scroll down the page a bit): http://www.experts-exchange.com/Operating_Systems/WinXP/Q_20803229.html Let us know if any of this helps.

Here's Symantec's document on how to uninstall it: http://service1.symantec.com/SUPPORT/nav.nsf/docid/2003080311011006?Open&src=&docid=2002031914291648&nsf=ent-security.nsf&view=docid&dtype=corp&prod=&ver=&osv=&osv_lvl= If you've tried this and it isn't working for you, post back and we'll try...

The error is in the MUP.SYS file. Try this thread from Annoyances.Org: http://www.annoyances.org/exec/forum/winxp/t1047532372 Hope this helps.

Your log shows that the PC is infected with a CoolWebSearch variant(entry "O19 - User stylesheet: C:\WINNT\my.css"). Go download the Cool Web Shredder program (CWShredder) at the following link: http://www.spychecker.com/program/cwshredder.html This will fix your hijack browser problem.

The BHO's are fine. You are mostly clean. Have Hijack This fix these entries: O3 - Toolbar: (no name) - {ACB1E670-3217-45C4-A021-6B829A8A27CB} - (no file) O4 - Global Startup: Real-time Monitor.lnk = ? O6 - HKCU\Software\Policies\Microsoft\Internet Explorer\Control Panel present O16 - DPF...

Hold down the F5 key during the boot process and it should go directly into Safe Mode. You can also hold down the F8 key during the boot process which will give you a boot menu from which you can choose Safe Mode. Hope this helps.

I'd say your floppy cable is damaged. Specifically the pin 34 wire (the outside wire of the ribbon cable that is NOT marked with a red stripe). It's either that or the floppy drive isn't sending a signal down the Pin 34 wire (bent or broken pin on the motherboard or the floppy drive itself)...

The only way I know of doing this is by using "KVM over IP". Try searching on this term and see what you come up with. Hope this helps.

I'm no expert, but I see some correlations to a variant of Coolwebsearch. The O1-Hosts and R1-HKCU\Software\...\Main,Start Page_bak definitely seem related to this. Is your IE homepage changing to Searchv.com or any page changing to Searchv.com? May want to check out this link...

This may help for Norton Anti-Virus: http://service1.symantec.com/SUPPORT/ent-security.nsf/9d94c8571a91ba4788256bf3007f62b5/afbdad85dc3748e688256aea0059f5bf?OpenDocument&src=bar_sch_nam

Try this: http://images.google.com/images?q=Windows+2000+login&svnum=10&hl=en&lr=&ie=UTF-8&oe=UTF-8&filter=0 Hope it helps.

It may be that the ACPI HAL is detecting hardware incorrectly. Two things you can try when you see the screen during install that says "Press F6 if you need to install a third party SCSI or RAID driver". You can press F5 which will allow you to choose the appropriate HAL for your...

If you want to put Windows 98 back on the drive. Download the utility delpart.exe (http://www.russelltexas.com/delpart.htm). Use this to remove the NTFS partition created by Windows 2000. Boot from your Windows 98 Start Disk and use FDISK to recreate the partition, then reboot (very important...

Had the same prolem once with a Compaq Armada laptop. Not sure how far you want to take it, but we had to take the laptop apart and disconnect the battery to the motherboard. There is a wire under the keyboard that connects to the battery. Removing the wire connector and replacing it again...