Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by telctech

  1. telctech

    NAT with Ports

    Hi all, I am not epert in NAT"ng , please bear with me with this Q I have one PUBLIC IP ,we did the NAT it is working fine for the Internet now we aquired a SIP trunk from service provider , service provider is telling i need to do the NAT to connect the SIP trunk, also ISP is telling they...
  2. telctech

    SIP Trunk - NAT 5.0.8 IP 500

    Thnaks amriddle01 I thought may be somebody has did same configuration with IPO , thats why i posted hear Thanks for your Advice Our Router is Cisco 800 series Model 871 Thanks
  3. telctech

    SIP Trunk - NAT 5.0.8 IP 500

    Hi All, We are in the rpocess of setting up a SIP trunk one of the service provider , i am new to this SIP world, pls assit me Service provider is telling us we need to do the NAT;ng in our Router & two ports (8088 & 5060) to be forwarded or opned we have one Public IP the same IP is used...
  4. telctech

    VM Pro 5.0.23 Auto Attendant Issue

    Thaks TaureanDragon for the post this is how i set it up in VM Pro Shortcodes , i set up the start point with menu action & trasfer tab we recorded the promt using telephone , i try to change the folder from enu to en to custom all the time it behaves the same. If i change the locale to US...
  5. telctech

    VM Pro 5.0.23 Auto Attendant Issue

    Still VM pro does not recognise the Locale , IPO is set - UK Locale when i change the Locale to US , auto attendant works fine but we cnat use the US , we need UK locale when i set IP office to UK , Auato attendant does not pick up AA, in Debug view it shows locale eng is does not exsisit...
  6. telctech

    Auto Attendant - Call is not disconecting

    Dear All, we are using IP IP office 5.0.8 & VM Pro 5.0.23, with Auto Attendant, When the caller dials the extn directly extn rings if the user is not present caller disconnects the phone but the extn keep rininging until somebody lift the phone & disconnects all the trunks are Analog no...
  7. telctech

    VM Pro 5.0.23 Auto Attendant Issue

    Dear all Thanks for the reply this is what i found when trace in VM Pro , it shows locale laungauge is not installed trying to use EN , i just enabled one greeting in wav files of VM pro it gives the prompt to outside caller i am using UK locale , but VM pro installed US English how to...
  8. telctech

    VM Pro 5.0.23 Auto Attendant Issue

    Hi ALL I ahve created the Auto Attendant Claa Flow , whne i dial internally using the short code i get Promt & i can dial the extn when call from outside it hits the VM i can see in Call status as RAS but i am not getting the promt what is worng here any body has this issue Thanks in advance
  9. telctech

    IP Office 500 VPN

    Dear All, We have IP 500 with IPSEC licensed is opned , is there a possibilty using VPN with IPO without having any external VPN concentrator Like Netgear or Cisco VPn Concentrators Please advice Thanks in Advance
  10. telctech

    LSP to ESS

    Hi ALL, somebody can guide me how we can convert our LSP to ESS , this S8510 server running on CM 5.1 Thanks in Advance
  11. telctech

    Call Clasifier TN 744E quantity

    Hi ALl, in each Port Netwrok how many call clasifier should be placed I have One G650 as separate port network , 9 slots are free can insert around 7 TN744E TN in the same G650 , is there any Limitation on the same Thanks in ADVANCE
  12. telctech

    Conference Meet Me

    Hi Kolladay I have download the set up & uploaded to VMP , when i call it is asking for Conf Number when i enter 10 , it asks for Password, which password should i put in here , i checked in the veriables there is no password defined could pls help me in this regard , where to put in the...
  13. telctech

    TAPI with Outlook

    I have installed the TAPI driver for Outlook on XP Machine, I am able to dial out from the contacts from OUTLOOK , but when incoming call comes to My extn it does not popup, is there a way to popup outlook when call is ringing,using only TAPI driver without Phone Mnager Pro Thakns in advance
  14. telctech

    1616 IP Phone with R5.0

    Hi ALL, we Installed the 1616 IP phone with IP 500 R 5.0, we have following issue is anybody had the same issue??? when extn call recived it is only showing answer , it does not show from which extn call is coming , after answer the call it shows the extns number & name second whe we press...
  15. telctech

    VOICE Portal License

    i am in Dalas this is the 1st time i am working on AVP , pls tell us when we request fro license what information we need to ive it to RFA team Like serial number or MAC address Thanks in advance
See more

Part and Inventory Search

Back
Top