Recent content by techxupport

Wow.... I've been working on the same problem for the pass week as well. My problem is somewhat similar. I need to schedule an executable and some copy command to run at midnight and for some reason, the copy commands will work but not the executable. I've tried different ways to get it to...

Since we are on this topic, how about the routers? Anyone know if they are still using the 2501 on the test or is it all 2600 routers? 2600 loads the ios into ram as to 2500 loads into flash.

Ok guys, I finally figure it out!! I forgot that I did install some stupid firewall a while back on my laptop and forgot that I hid it and ran it as a service. I finally disable it and now it works. Sorry for making you guys read all this mess.

Ok, Now I can ping the Router, but the router can not pick my laptop. The router IP is configure as 192.168.1.1 255.255.255.0 and the laptop is configure as 192.168.1.2 255.255.255.0 Gateway 192.168.1.1 I can ping the router with response and everytime on the console when I try to ping the...

Ok, I just figure it out. My laptop nic adapter settings are all wrong. I forgot to change it to 10mbps as to 100mbps from my LAN. What a dump mistake. Thanks everyone.

I can console to the router via the console port fine. I want to backup my IOS incase of any problem via TFTP server. When I plug a cat5 crossover cable from my laptop to the AUI Transceiver, and I set my laptop IP to the 192.168.1.2 255.255.255.0 and the Router E0 IP to 192.168.1.1...

Hi techkiwi, Well, I know the order of the layers and somewhat know what they do. I guess I need more studying. :)

Hi Guys, I just wanted to thanks everyone's contribution to help me set this up. I guess I was just anxious to jump ahead to set up the routers and switches. But now, I am just reading the books to get all the concepts first than I'll start playing with the routers and switches. Someone...

Thanks Jsteve for all your help.

Okay just realize something. I can ping from router 1 (192.168.1.2) to 4500 (192.168.1.1) I can ping from 4500 (192.168.1.1) to router (192.168.1.2) I can't ping from router 1 (192.168.1.2) to router 2 (192.168.3.2)? Strange.

Bingo... That works!!! JSteve is the MAN. Thanks dude for this late hour support. But for some reason I am still having problem with the switch can't see one of the routers. Its not the tranceiver or cable cuz I switch them all around. :( You've been a great help Jsteve.

Post it.

This is from the 4500. Serial1 is up, line protocol is down Hardware is HD64570 Internet address is 192.168.2.1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec)...

This is from Router 2 serial0 is up, line protocol is down Hardware is HD64570 Internet address is 192.168.2.2/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation HDLC, loopback not set Keepalive set (10 sec) Last...

I am doing this via console to 4500 I am trying to ping from the 4500 to 192.168.2.2 success rate 0 I am trying to ping from router 2 to 4500 success rate 0 another question I have is do I have to config an IP on the switch as well?