Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by TechNasser

  1. TechNasser

    caller id @ BC11

    i bought the license from the local vendor i have already used the ELU29 R10J board but it does not work. the local vendor said that it needs a batch file for the bc11???
  2. TechNasser

    Hicom150Ecom

    Hi all What can I do in case I forgot the administration password?. Thanxxx all
  3. TechNasser

    caller id @ BC11

    hi all i have a md110 VERSION=CXP1010001/5/BC11SP14/R4C I bought the license to activate the caller id on the analog extensions, i could not initiate an extension with caller id , this message appears: <EXTEI:DIR=450,EQU=001-1-60-01 ,TYPE=EL6,CAT=1,ICAT=8000; NOT ACCEPTED ICAT NOT IN RANGE...
  4. TechNasser

    Security protection on reset:

    hi if you have more than one terminal for programming try to log in using the free terminal and gives this command RFPUI:UNIT=TSWP2,LIM=1;/if IPU exist/ RFPUI:UNIT=TSWP3,LIM=1;/if NIU exist/
  5. TechNasser

    NIU firmware

    its a niu1 board R3A i send the NIUR6A to the following path /sysn/usr1/ses/fi then Cnbli cbsi cnbci all commands were excuted but the NIU keep the R3a and R2a firmware
  6. TechNasser

    NIU firmware

    HI ALL i have a NIU/R3A , i tried to upgrade the board level to R6A, everything excuted but the board keep the old level ?
See more

Part and Inventory Search

Back
Top