Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by tdmulor

  1. tdmulor

    Your Assistant - call windows

    Hi. I have a installation with 5 YA premium users, 1 of the sets can not initiate a outgoing call. the YA wont open the new dail windows when call is pressed. reinstall is tested but not helping, same problem. this installation is on a MS vista computer. and the system is 3300 ICP with latest...
  2. tdmulor

    Hotdesk Users

    Thanks alot. Works great.
  3. tdmulor

    Hotdesk Users

    Hi. Is there a way of logging off hotdesk users remotely, any maint commands or something? //UO
  4. tdmulor

    not showing incomming number

    Hi. first thanks for al tips. I will try to scan whats comming in. I also belive that it is a operator issue. Thanks for this time.
  5. tdmulor

    not showing incomming number

    Hi, I have a customer abroad and when they recive a call from outside UK (where the pbx is) they dont get the caller ID. is there some settings in the system (3300 ICP, software release 8.0.11.7) Regards U
  6. tdmulor

    Trouble with email function in the vocie mail.

    Hi I have tried the above and there is nog differce, cant send outside my domain. Is there a maint command that I can use to se what error I should have?
  7. tdmulor

    Trouble with email function in the vocie mail.

    Thanks. Does any one know how to solv the above in a Exchange 2007? Regards U
  8. tdmulor

    Trouble with email function in the vocie mail.

    HI all. I have the adv voice mail in a system. MX3300 SW: latest release of 9. We have different of extentions in this system and the system is set up in our local network. the mail function is working fine within our network, but if I use a external mail adress it wont sent the email, atlest...
  9. tdmulor

    Teleworker audio issue.

    Hi. I just hade installed a teleworker server to a system. (3300CX, 9.0.1.17) I have used the teleworker network test tool and looks okey. but I have no audio. the teleworker is installad behind a ingate firewall. any tips or idees.. ? Regards UO
  10. tdmulor

    DECT RFP32

    Hi. Not sure if this is the right forum but... I have a Dect Base RFP 32 that used to be connected in a nother building and in this building the system it self is and provide the dect base with dchp adress, at this site the dect base works. now the customer has a nother site and would like to...
  11. tdmulor

    Lost admin password

    I is there someway that I can retreive or reset the admin password to a IPECS system? Regard UO
  12. tdmulor

    Hunt Groups

    Ok. that I understand, thanks. If i have a hunt group (Terminal mode) with 3 members (Ext 501, 502, 503) and the hunt group offers a ext 502 because the 501 is busy. the ext 502 is transfering the call to ext 601 and there is no answer on 601 (now 501 and 502 is free) the call is routed backe...
  13. tdmulor

    Hunt Groups

    Hi. I wonder about this different type of hunt groups mode. You have terminal and circular. If i have a hunt group with the type of circular and the person in the hunt grops that get the call is not able to answer (Ext 502) and this call i rerouted to another hunt group med the same members is...
  14. tdmulor

    Trouble using YA and TW

    Hi. I have a customer that use Your Assistant (4.1) wich works perfectly in the office. when he tryies to connect to the pbx using TW he revice this error. "Underlying connection was closed: Either there was a fatal error on the server or client authentication failed" YA version 4.1 MAS...
  15. tdmulor

    passcode to get further

    Ok. thank you. Is I assumed. I think the above will be a work around for my customer. when I rerout the caller to DISA, can I there reroute the caller further to a correct answering point if the pressed pin is correct?
See more

Part and Inventory Search

Back
Top