Recent content by tcwinont

Thanks in advance for any help. XXX is my local domain name. The server is XXXserver. The XXX is the same for both. I have SBS 2008. In exchange, I am trying to set-up my multi-function printer/scanner/copier to be able to email scans to it. Through Exchange Management Console, I have...

I changed the DN from another phone from 230 to 251 to see what would happened. The phone at the 251 rang fine and was accessible. I called in from an outside line into my phone and let it ring seeing what would happen and if it got redirected to extension 251 which it did not. So I instead...

Thanks in advance for any help. This a less then 2-year old CP150, 8 port (4 active). Problem seemed to start after the new year. VM version 31.10.14.22. For some reason,it will not pick up calls after ringing at extensions to go to voicemail. Other then this, it's working OK with AA picking...

Sorry for the long delay with an update. I do have only 1 6-port fibre card in the slot beside the line cards. OK so this what I did. I swapped the first line card with one of the line cards in my fibre trunk module and it's been working so far so good so I'm not going to tamper with it. The...

Thanks in advance for any insight. The lines when selected at any phone gives a 'Not in service' and a fast busy signal. I've switched the line cards to make sure it wasn't a bad card and the problem to not follow the card. It only affects these lines and none of the other 11 lines higher...

Thanks in advance for any help. I have two people in a start-up associate office that have mistakenly ordered XP Media Center Edition 2006 instead of XP Pro to be used on my local area network. Can I install Windows XP Pro over top of the XP Media Center and bring over the programs and...

Is there anyway in changing the system to use another hard drive instead of C to use as the print spooling buffer? I have a 12.0GB partition on my server and MS Exchange as well and I am finding that I am constantly running out of hard drive space when the server receives a very large print job...

I know I have a real old system. I will be adding a trunk card to the 3rd slot (last on the right) in a fibre expansion module attached to connection 8 on a six port fibre expansion card. Lines 13,14,15 and 16 are system lines 052, 053, 054 and 055 respectively. Will my new lines be 056...

Can anybody tell me if there is a limitation for this software version? I know it's old but I have to deal with it. Right now I have 3 and need to add at least 2 more. Thanks.

Does anybody know how to get an automatic one of this on the LT version? I know there's one in the full product but need it for my LT stations. Thanks, Tcwinont

Paul: Thanks, I actually found it through AutoCAD's built-in help files.

Too add to this, the 'Recover' option from the same pull down menu produces the same result but defaults no file name.

This is driving me crazy. After having an explorer window open and dragging and drop files into AutoCAD 2000, the Open File Dialogue box does not appear anymore and goes to a commnd text linen waiting for an input of the file to be open. It lists the last file that was dropped into it. I...

Nave911: Check out this thread http://www.tek-tips.com/viewthread.cfm?qid=1116700&page=1 and this knowledge base (KB) http://nam-en.apc.com/cgi-bin/nam_en.cfg/php/enduser/olh_adp.php?ISOCountryCode=us&p_faqid=7202&p_olh=1 Had this exact same problem crop on me about the July 27 day it mentions...

I should add that I can't seem to add any new hardware and have it automatically installed by the operating system. I had installed an Adaptec 29160 SCSI card into the green PCI slot (longer than the typical PCI slots) and connected a ST150176LC SCSI hard drive to it. It works fine in POST...