Recent content by tb1254

Well that should at least le me play arround with the 5.0.7 box. However, the majority of the pc's I need to use expect on are 5.0.0 and I have a few others that are the 5.0.5 variety.

Does anyone know what is the latest version of TCL I can use on SCO 5.0.0? The reason being I want to use a program called Expect to do an automated password change on a remote pc. The verison of Expect will work with TCL 7.6 and above. The TCL that's on SCO 5.0.0 thru 5.0.7 is 7.3. TIA

Problem solved as good as it will be. What I missed that the loginlog file gets populated after 5 unsucessful logins and that parameter can't be changed.

I tried relinking the kernel, then rebooting and still nothing. I must be missing some step somewehere?

Just to add, in the system administrator quide chapter 5 it said to make a log of the unsecsessful logins just make a file called loginlog in the /usr/adm directory. I have done so giving both owner/group to audit and still I can't get it to log the unsecessful logins. What I am doing wrong?

The output from the last command does not give me what I am am looking for (the last command only gives me the user logins but not any invalid logins). I need to see both the valid and and invalid logins.

OS: SCO 5.0.0 I need to be able to list all the logins and logouts including any unsucessfull ones. I have looked in the adminstrators guide, and I am somewhat sure this information is located in the /etc/utmp and /etc/wtmp files but they are both compacted or encrypted. Any help you all...

OS: SCO 5.0.5 I am having problem using the cdrecord program with this version of SCO. When I try to run the cdrecord program, the PC is totally locked up I can't even open another session to see whats going on. When I run cdrecord -scanbus I get the following: 0,0,0 0,1,0 'My cd' 'model...

You could try it, but it sounds like the hard drive is bad. Once you get the read error message, its time to either wipe the drive and start over or replace the drive.

We are using the same card and haven't had any problems. I would make sure that the SCSI ID numbers match up on the drive and the Adaptec setup and also check for termination problems. What kind of hard drive are you using IDE or SCSI? If IDE, make sure the tape drive is terminated. If SCSI...

If I remember right SCO support for SMP just came out for version 5.07 and even now its not right according to their docs. You may have to reinstall from scratch to at least get the system up and running.

Try echo foo >> test 2>&1 It should work if not try a man on redirection

Do you want to do this automaticaly or manualy? On either case do a man on uucp for some help. You will need to setup your modem in the /usr/lib/uucp/Devices file, the /usr/lib/uucp/Systems file, the /etc/inittab and in the /etc/gettydefs files. Again first thing to do is man on uucp. Also, you...

Have you tried removing the PCI Multi IO card and the drivers and see if the computer has any problems? Sounds like a driver/hardware issue with the PCI Multi IO card. Could be a interrupt problem where the OS has reserved a particular IRQ for a device and the PCI Multi IO card defaults to the...

The error message indicates that it can't find the start of the backup or the information on the tape is not in cpio format. Do you rewind the tape before backing up the data? I would retentention the tape try a backup, then rewind the tape and see if the backup succeded.