Recent content by tanjune

Main unit all dsm32 and all working. Exp cabinet is slot-1 thru slot-3 dsm 32 and all working. Slot 4 4x16, slot 5 thru slot 6 DTI and all working. Combo digital station is working but not the 4 port trunk lines.....new combo is on the way for replacement and will update then....thx

Yes, it says 4x16[color

Has dt and dips are according to element manager but will considered card

No cable for this card it has the 4 plug in for the lines

System is giving me enabling state for the lines and card is the plug in with the rj11. The pri is 0 to 48. And then voip lines and then the loop

Performed reboot and still no dt!! The bcm gives me lines 59 to 62. I also have 2 dtm working as well but need these 4 lines to be working. This doesnt make any since cause the digital exts work and the lines are labeled in the system as loop on those ports but when I access them it says not in...

dt on all lines but when I go to acces that line Not In Service

just noticed the digitals exts work but still not the lines ?

mostly need the 4 lines working and have not attempted or even that concern with the digital sets. its keeping my butt

Can you install a 4x16 on a bcm450 ? its the card that will not work so far on this 450 it shows enabling no matter what slot its in exp or main. thanks

@wires.....U hit it right on the bullseye.

My question .....will connection speed be slower if I install a 100mbps fiber converter between 2 1000mbps data switches that are only 600 ft apart. The goal is to hopefully maintain that 1g speed......Our setup is office A has a 1g switch and there is a 600 ft multifiber cable to office B with...

hopefullly you solved it but its the dip sttings.

i got it

i asking can a 6 port fiber media card be used on a expansion cabinet. im upgrading a bcm 50 and need to add more lines and exts. The base unit has the keycodes for 4 lines and 12 exts but its time to expand.why not fiber media in a expansion with a norstar sm and tm that we already have? advice...