Recent content by tangostar

Nothing that I can see, is wrong with it.

I see nothing that references the old sub domain. I've also tried using the ntdsutil to locate something.

W2K Domain In one Site I have a single DC. Logins are slow because of the message, "applying personal settings...." Checked Events on DC it looks like the delay is because the clientsare trying to get a policy from a domain that doesn't exist. The error references an old child domain that was...

If you have the cases some tape manufactures have lifetime warrentees. You can return the tapes to a dealer and get new ones for free.

Is this a hardware RAID solution? I assume it is. The manufacture probably has a boot cd for managing the arrays. As for backups traditionally people backup to tape. If a complete restore is necessary you rebuild, reinstall the OS probably reload the software and then reload the data off of the...

just wondering. I know that in the client in the options by default it probably has use remote networks default gateway. Uncheck this you don't want that.

I have a VPN established between a Cisco 1812 and a Linksys RV082. It is established but it doesn't have very good preformance. Some applications will not work through it and printing is slow between sites. I also believe that the packets are fragmenting. ! version 12.4 no service pad service...

Sorry I didn't make any other changes. THe cisco is my gateway so the next machine is my ISP's

you're going to have to do some policy based routing. When last I looked at this situation it was necessary.

I have a cisco 1812 my remote routers are linksys RV042 and RV082 config I'm using is: crypto isakmp policy 1 encr 3des authentication pre-share group 2 lifetime 3600 crypto isakmp key xxxxxxxxxx address 66.11.xx.xx no-xauth crypto isakmp key xxxxxxxxxx address 207.139.xxx.xxx no-xauth...

I can ping from the remote sites and I can reach web pages on port 80 but anything else is a no go.

yes it has to be that way for the NAT rules to work. remote networks are in the 192.168.0.0 192.168.123.0 remote routers are linksys RV042, and linksys RV082.

Have you got your VPN to work? I have a RV042 and I've got my vpn to work, mostly.

! version 12.4 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption service sequence-numbers ! hostname proxy ! boot-start-marker...

I have a Cisco 1812 in my central location, and 2 vpns connecting remote locations. I can ping from one side to another and I can print in the remote locations, but the remote locations are unable to access services in the central location. Any ideas?