Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by studio1129
-
2 scopes, 1 superscope, 1st scope works 2nd does not
Thanks for the help Folks! Problem solved... This was a strange one... The port on our Cabletron 6000 switch receiving the feed from the gateway was set for 10 mbit/half duplex Our NEW router for our gateway was set for 100/full duplex. (the feed leaves the gateway..goes to a hub..then to the...- studio1129
- Post #6
- Forum: DNS/BIND/DHCP/WINS Issues
-
2 scopes, 1 superscope, 1st scope works 2nd does not
Thanks for replying I am getting "can not find DC" on the hardcoded machine I also just set up a DHCP relay agent on the new subnet hoping to solve my problem...I really need the new addresss Thanks Rick Strickland- studio1129
- Post #3
- Forum: DNS/BIND/DHCP/WINS Issues
-
2 scopes, 1 superscope, 1st scope works 2nd does not
Hello Nt4 domain...DHCP on win2k member server..no dns...using wins 2 scopes 10.104.64.1 thru 254 10.104.65.1 thru 254 both in superscope 1st scope passes out addresss..2nd does not only router used is for access to internet, it is configured with 10.104.64.1 and 10.104.65.1 switching...- studio1129
- Thread
- Replies: 6
- Forum: DNS/BIND/DHCP/WINS Issues
