Recent content by stevetotaro

Communication-interface Processor-channels form. I have busied out everything relating to the signalling and data but still get "identifier not assigned" when I remove the entry from the Communication-interface Processor-channels form. it is just two lines. 1 isdn 1 h 2 isdn 2 h I...

I am willing to send PayPal funds to anyone that helps me get this fixed, $100 if it is easy, more if it not.

I have tried busying everying related to the board and I still cannot remove it. The manual suggest that "identifier not assigned" means that some such port does not exist. I am just removing one.

I am trying to connect a Definity G3 to an asterisk system. I had it working OK with the exception of the caller ID on the Definity handsets just showing the trunk-group name. I created another ISDN Processor Channel and other configs to make a separate T1 connection. It worked as far as the...

ummmmm yes, it is RHEL stripped of Red Hat references and released under the GPL.

I have an SGI box with dual 64bit Itanium processors. I would like to create an image similar to what G4U would create. G4U does not boot and I was wondering what alternatives there are. Thanks for any help, Steve

looks interesting. would be cool if it could do SIP.

it comes with a single license. its called pcxset. look here for downloads http://www.3com.com/products/en_US/result.jsp?selected=all&sort=effdt&order=desc&sku=WEBBNGNBX100COMSYS

ebay?

are you using exchange call center?

Fairly simple actually but not obvious... go into netset/extension lists click add list extension is *0009 or whatever comes next Name it something appropriate add the ports that will use this route go to operations and edit the dialplan (backup first) this part is a little tricky if you dont...

what type of phone? if you have a vpn its extremely easy. all you have to do is configure the phone and have ip on the fly set on your nbx.

I have an NBX 100 and an Adtran 600E. I would like to connect the NBX to the Adtran via a T1 crossover. The Adtran has 24 FXO that I would like to use for incoming lines. Does anyone know the correct settings on the Adtran or the NBX T1 board or if its even possible?

I am trying to setup a Cisco 1721 Easy VPN server through SDM with clients connecting via the Cisco VPN Client. I cannot get it working and have tried everything I can think of. I think the problem is with "NOTIFY:NO_PROPOSAL_CHOSEN" Does anyone have any idea what is wrong. Below is the log...

I have an NBX hooked up to another PBX via analog CO ports on the NBX -> Analog FXS ports on the other PBX. It works great but I would like to make any calls that match 3XX to go over one of these ports to the other system and 2XX to stay on the NBX. Currently I have to press a mapped...