Recent content by SSChris

We have been backing up one of our servers to a LTO 100/200 GB tape for quite awhile now. The backups were aroun 125GB worth of data, but through the hardware compression, they were fitting on the tape. This week we installed the encryption option, and now the backups will not complete...

I did reboot last night, and the extension ID came back.

In trying to solve one problem, I may have created another. I deleted one of the Extension IDs, and now I cannot seem to find a way to re-create it so that I can change which extension goes along with it. Does anyone know of any way I can get this extension ID back?

Sorry..that's SEVERE, not SERVER static

I have an Avaya IP Office IP401, with 3.0(40) code on it. This particular unit will have a problem once every few weeks. What happens is that any calls to/from the unit over the analog lines have such bad/loud static that it is not possible to hear/talk on the call. Calls made over SCN to any...

Thank you both, we are waiting to see how the 3.0(59) release pans out before upgrading those 2 sites.

We have several branch locations each on version 3.x When they call into our main office(ver 2.27) and are transferred either to another extension in our main office, or to our Operations center(2.27) the call usually is just dead air. Neither party can hear the other one, although it appears...

The problem was/is that I was printing from an HP3000 running MPE, and it can only print to an HP JetDirect. Thankfully I was able to find some software which allowed me to be able to emulate an HP JetDirect, so that I was able to capture the print stream.

Does anyone know if it is possible to have an HP Jet Direct print to a file, rather than to a printer? Thanks.

milehighip - Thank you, now a couple of questions: 1) Is there no need for a N# in any of those short codes, or are they as seen above? 2) In the short code for site B, is the Number 101, or *101? 3) Does the person doing the parking at site A do anything different? 4) What exactly does someone...

I do have that short code at SiteA, put it is setup to go to the "local" line id, and not across the IP line. Do I need to create another one that will "look" across the IP line to SiteB? Thank You.

Thanks - does the code need to be *99*N# The reason I ask is that we already have a short code which begins *99, so I set this one up using *97*N#, and all it does is ring the extension I dial, rather than pickup the parked call. Anything that I might need to do on the "a" side? Thanks.

Does anyone know of anyway to Park a call on one IP Office, and pick ip up on another IP Office, connected via SCN? Thank You.

We have been performing MS Office Updates using WSUS. The updates work well, however we are running into a problem. After the update is performed, the 1st time the user opens an Office program it asks them to accept the EULA. Since they are not Machine administrators, it lets them accept the...

I have the following scenario: Two devices connected on their own VLAN, to Switch A let's say their IPs are 10.1.1.1 and 10.1.1.2. I have a router also connected to switch A, which currently routes traffic from networks 10.10.0.0 to 10.20.0.0(remote location). The devices on the 10.10.0.0...