Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by srcvh1

  1. srcvh1

    Using RES Command in LD 43

    Thank you Firebird. it says in documentation that the command is RES XXX, as in RMD or USB. Can I do it as F0 or F1? From there it says to INI not restart. I am trying to avoid another reboot. Also, I am not familiar with PDT procedures, if I need to reboot can I just do another paralell? Thanks
  2. srcvh1

    Using RES Command in LD 43

    I just did a parallel reload on an 81C to get some licenses updated. Very basic procedure right, wrong! I made the mistake of doing a backup on the active Core and not the inactive Core. Well, the system booted up on the inactive Core off of the disk that I did not backup. Of course the last...
  3. srcvh1

    Is there an alarm manual for CallPilot?

    I know about that but I'm not onsite. Working remotely 2 hours away from the site. I'm getting screen shots from the customer
  4. srcvh1

    Is there an alarm manual for CallPilot?

    Does anyone know if there is a Callpilot Alarm Manual of some sort? A central place where you can look up alarms on the server. Like CS1000 MAINT NTP for the PBX.A central manual or place on the Avaya support website. You would think this would be something basic but I'm having a hell of a time...
  5. srcvh1

    Can not load languages

    Has anybody ever run into this before: I just reimaged a 201i. Then I reloaded the database from tape. From there I do my config wizard. All is good except that the config wizard keeps saying I have the wrong path for the language CD. It populates with z: and I look on My PC and see that it is...
  6. srcvh1

    DTMF lost between CS1000 and Cisco

    I have a migration going on from a CS1000 and Cisco. Currently they have SIP trunks with Session Mgr between them. We recently rolled all the PRIs over to the Cisco and adjusted routing between the CS1000 and Cisco to go over the SIP trunks to access the outbound PRIs in the Cisco. So far so...
  7. srcvh1

    App Builder Menu locked from a previous Admin

    Hello All! I am thinking I have a generally easy question but I've tried just about everything! I have a menu I need to edit but it says it's locked. I get: This application can not be opened because it is currently being updated by another administrator. Please try again later. The problem is...
  8. srcvh1

    Point to point PRI programming

    Thanks for the input guys. As it turns out it was a wiring issue. The problem was on the extended smartjack wiring, thank you Verizon!! I just wanted to make sure my programming was good before the finger pointing started. Thanks again!
  9. srcvh1

    Point to point PRI programming

    Having troubles getting circuit to come up between to option 11s. You would think this would be pretty basic. At first the circuit came up and I was able to make test calls no problem. Then it dropped and kept dropping sporadically. The slips were all over the place. The far end doesn't have a...
  10. srcvh1

    Moving Option 11 Meridian Mail from one system to another

    Hello all, It has been too long since I've dealt with MM so I'm reaching out to the experts here. Here is my situation. I have two Option 11 Rls 25.08 systems. They are linked via point to point PRI for Meridian Mail purposes. The customer has deployed Cisco at the Mer Mail site. The only...
  11. srcvh1

    Strange TNB printout. Possible corruption?

    Something strange I've never seen before. Has anyone ever run into this. In prting out a TNB I get HUNT*** and FDN***. What does that mean? Is it possible corruption? This phone does not FDN or HUNT anywhere which is what it is suppossed to do. I just thought it strange. Here is the printout...
  12. srcvh1

    Remote Digital phones

    I have a situation I haven't dealt with in a long time so I need a little help remembering. Heres the scenario. I'm looking for the best solution: I have 2 Option 11s. One is the main with a PRI between the 2 for VM purposes. The 2nd Option 11 has slowly been dwindling down people to the point...
  13. srcvh1

    Intermittent one way speech path and BSD202,206,207 errors

    I have an Option 81C Rls 3.0. Pentium II with IGS cards. Customer is complaining about one way speech path across all loops internal, and external. Along with this they are getting BSD202,206, AND 207 errors at midnight. They think this all coincided with some power failures 6 months ago. There...
  14. srcvh1

    Call Pilot 3 digit Mailboxes

    Hey All, Got another doozy here. This will either be something stupid I've overlooked, or I'll have everyone scratching thier heads! Heres the scenario. I have a 201i that crashed. Replaced the drive, reimaged, config wiz, load patches. Server comes up fine and able to except calls. I had no...
  15. srcvh1

    Call Pilot CPSECPEP017S update question?

    So as long as the SU is not mentioned in the read me it doesn't have any impact on the SEC, I could be at SU 7 as long as it is sp2?
See more

Part and Inventory Search

Back
Top