Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by squaredeal

  1. squaredeal

    Cannot format tapes-Cannot run basic backup jobs

    I have inherited a server installed with acrserve ver 11.1 .this server has since crashed and I am rebuilding this.the tape drive is a quantum superloader I cannot format or erase tapes backup jobs fail tape drive say " updating " nerver stops when i go to format a tape the dialog box is empty...
  2. squaredeal

    exmerge

    how do you script exmerge to write out a mailbox 5 gigs to multiple pst files
  3. squaredeal

    trunking

    the ip routing--this should only be on one side of the trunk? to add voice vlan the command would be for example switchport voice vlan 301? ok ..so this is what i will have on both sides, interface FastEthernet0/48 description Uplink to switch switchport trunk encapsulation dot1q...
  4. squaredeal

    trunking

    here is the other switch config sh vlan VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/11, Gi0/1, Gi0/2, Gi0/3...
  5. squaredeal

    trunking

    there you go vipergg----jack   VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 400 VLAN0400 active 1002 fddi-default active 1003...
  6. squaredeal

    trunking

    This is the switch i need to connect to on fa0/11 ! interface FastEthernet0/10 description IP Phone port switchport access vlan 300 switchport mode access switchport voice vlan 301 switchport port-security maximum 3 switchport port-security switchport port-security aging time 2...
  7. squaredeal

    trunking

    I will post both config files shortly. Jack
  8. squaredeal

    trunking

    Burt, Thank you for replying here is the interface I am connecting to >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> interface FastEthernet0/22 switchport trunk encapsulation dot1q switchport mode trunk interface Vlan1 no ip address ! interface Vlan300 ip address 172.17.13.254 255.255.255.0...
  9. squaredeal

    trunking

    one is under a vlan300 on the 13 network and the other is it native vlan1 but on the 8 network thanks for the reply
  10. squaredeal

    trunking

    I set up a trunk between 2 3560 switches, I can see them as neighbors but cannot ping them the config is switchport trunk encap dot1 switchport mode trunk this is on both switches what am I doing wrong jack
See more

Part and Inventory Search

Back
Top