Recent content by spydummy

hi gentech, i actually have a branch office between contivity 110 and 251. the 251 has a dynamic public ip address. i created a ddns account in the dynamicdns.org which you mentioned previously on this thread. i managed to bring up the branch office successfully but due to the dynamic...

hi gentech can i know how to specfic the hostname in the Contivity 1010 that you mentioned? Thanks in advance.

Hi, I've trying to setup a branch office between Nortel Contivity 1100 and Contibity 251. I have absolutely no experience with line of router. I have public IP address for the Contivity 1100 but the remote Contivity 251 is using dynamic public IP address. Private Net1--Contivity--Cisco...

Hi nsantin, Has tried your configuration but found out that there is some "missing" prompts that you indicate above. Are you able to advise how can I "turn" on the prompts? Missing prompts are: On the linksys side, there is no username field in the advance setting. Understand that this is...

Hi nsantin, thanks for your configuration. I will try it out.

Hi, I've trying to setup a branch office between Nortel Contivity 1100 and Linksys WAG54GVS. I have absolutely no experience with line of router. I have public IP address for the Contivity 1100 but the remote Linksys router is using dynamic public IP address. Private Net1--Contivity--Cisco...

To be more specific, how to configure in the SCCS sript such i want to discard the caller entered digits during a preceding Play Prompt command

How to user No Type Ahead keyword to tell system to discard any digits pressed by the caller fefore this command was executed? Any example???

Hi mluckie1, thanks for the info. for MFRL value, it has programmed with the minimum value 0. Is this the correct value?

Hi Johnpole, Actually 001 has been programmed in the nars as SPN already. And it still could NOT use 9 to dial out and that's why it puzzle me...

For everyone's info: 001 is the prefix given by the service provider in order to dial to oversea numbers.

My system having 1 ISDN trunk with the access code 12345. My system uses this ISDN trunk for incoming and outgoing calls. The system also has been programmed to use NARS access code 9 in AC2, which means customer has to dial a 9 to seize a tone first before they make an outgoing local call. In...

Hi Jhonm can you send me a copy too? spydummy@yahoo.com.sg

Thanks for your all help. But I need to know how to key in NDS, CCNR, CCBS in the RCAP prompt. Anyway, Thanks for the help again

Hi Marc, I have the package 316. I not very sure y must use ESGF instead of ISGF. I heard that it is due to different region.