Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by splick
-
CUCM 6.1 ASCOM DECT D62
Hi all. Have recently implemented an ASCOM DECT lone worker / freeset system at my company. The handsets are created as Basic SIP phones on CUCM. The vendor advised to divert / forward calls on a handset use the command *21*Number#. This appears to work on the handset itself and an > appears on...- splick
- Thread
- Replies: 0
- Forum: Cisco: Call Manager
-
RODDP:dest=all;
All I can say is You Sir Are The Daddy. thanks very much for the help, this is for a ipt trial as looking at Cisco, Nortel, Ericcson IPT and need to force these ext over the Qsig link. thanks again- splick
- Post #5
- Forum: Aastra/Ericsson systems
-
RODDP:dest=all;
The output is below and these are 5 digit extensions and I just want to add the ranges 296,7,8,9, and put them over route 8. I need to know the commands to do this if anyone knows. cheers roddp:dest=all; EXTERNAL DESTINATION ROUTE DATA DEST DRN ROU CHO CUST ADC 292...- splick
- Post #3
- Forum: Aastra/Ericsson systems
-
RODDP:dest=all;
hi, I am new to this forum and new to the MD110. Have MD110 with 3 lims and wish to extend an extensions range to a route. So when I run rdoddp:dest=all; my extensions starting 292*, 293*, 294*, 295* go out over route 8. How do I add extension range 296*,297*, 298*, 299* to also go out over...- splick
- Thread
- Replies: 5
- Forum: Aastra/Ericsson systems
