Recent content by splicerguy

I solved it. Not sure how to close this damn thread.

Hey guys, I can't seem to forward any ports from the outside to my inside network. In my config I'm trying to forward ports 80 and 443 to 172.16.0.10 (an exchange server). Yes, I'm testing from an external source. No, the server is not blocking these ports because I can telnet to ports 80/443...

Thanks, that worked. I've fix the config so now the correct route is always added. Thanks again

The PIX is my main gateway on the internal network. Nothing else in the way. Route Print results from vpn client machine: Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.179.147.96 10.179.147.96 1...

I tried both suggestions but still no joy :(

I've made those changes yet I still cannot connect to computers on my inside network (172.16.x.x) When I do an IPCONFIG on my client pc, this is what it shows: Description: Cisco Systems VPN Adapter IP Address: 192.168.0.33 Subnet Mark: 255.255.255.0 Default Gateway: DNS Server: 172.16.0.10...

Hi, My clients are able to connect to my PIX using the Cisco VPN client, however they cannot connect to any internal computer. I've tried a bunch of different changes to my config (based on other people's similar problem), but I've probably just muddle it up more. Here's my config. I'm a bit...

Hi, My clients are able to connect to my PIX using the Cisco VPN client, however they cannot connect to any internal computer. I've tried a bunch of different changes to my config (based on other people's similar problem), but I've probably just muddle it up more. Here's my config. I'm a bit...

Yes, exchange server works fine. It's got internet access and I can telnet to port 25 without a problem.

Yes, I'm trying to connect to the public IP from outside my network.

Tried it. No luck. I did a complete erase of the PIX config. Still no luck.

Hey guys, I've got a PIX515E. I'm hosting services in both the Inside and DMZ networks. In the DMZ I've got a DNS and Web server and both are accessible from the Outside. In the Inside I've got an Exchange and test server. I cannot access any port on the exchange server (ftp,smtp, etc) yet...

Lowering the transfer didn't help. When I try a backup from NTBackup I get two errors in Event Log: "The drive \Device\SCSI\adpu3201 did not respond within the timeout period" "Library IBM HH LTO Gen 2 SCSI Sequential Device failed to write a free media label on media 3 because an I/O error...

Standalone: Adaptec SCSI CARD 29320ALP - Ultra320

No, NTBackup doesn't work either.