Recent content by spivy122

I was wondering if anybody has successfully integrated a BCM 50 to a Cisco UCM 7.0 system? If so what release was the BCM and did you use H.323 or Sip?

I also had this issue and received a response from my vendor on this. Nortel has a patch for this issue.

We had this issue also this morning. We also have NTP turned on. I just received confirmation from my vendor that there is a patch for this. The patch number is MPLR26202. When the patch is installed you must uncheck the DST box in EM. This patch is specific for release 5.0.

All thanks for the help on this! Our vendor finally got a reply from Nortel. Our configuration is supported and no changes are needed. This was an issue when upgrading to FNF from IGS but Nortel resolved the issue with the new clock controller NTRB53AA. The product bulletin that addresses this...

Bigindian thanks for the reply. I understand how to count loops and network groups. I get it...What I don't get is why is it Bad engineering? My company won't spend money just because somebody said I think it is a bad way of setting it up. They require that we have documentation stating this...

We have a CS1000m Multigroup(81c). We are currently running RLS 4.5 with Motorola 68040e processors and IGS. We are getting ready to upgrade to RLS 5.0, replace our Motorola Processors with Pentium Processors and replace the IGS with FNF. Our vendor is telling us that we need to change our...

This from Nortel's website: http://products.nortel.com/go/product_content.jsp?segId=0&catId=null&parId=0&prod_id=46984&locale=en-US The WLAN IP Telephony Manager 2245 is required for QoS because the current IEEE 802.11b standard provides no mechanism for differentiating audio packets from data...

I have the Sig Server and a vgmc running release 4.5. What purpose does the 2245 serve? Our wireless lan natively supports 802.11e so I am not sure what the purpose is of the 2245?

We are wanting to use the Nortel 6140 Handsets. Do we have to purchase the Nortel 2245 in order to use the wlan handsets? We have a Cisco Wireless infrastructure.

What do you get when you try to call the phone? If you turn on D-channel messaging on the d-channel for the Sip trunks what messages do you get? Do you have a dsc setup to send the call to the sip extension out the route for the sip trunks?

Thanks! Management is asking for a copy of that document. Can you provide me a link to it? I can't find it on Nortel's website(I can’t find hardly anything on their though).

That service requires the Logon as to be set to the NGENSYS account. On the server go to the Control Panel, Administrative Tools, Services. Once in the Services find the Sybase BCKServer... service. Double click on that and click on the Log On Tab. Make sure that that the Log on as: is set to...

We have a CS 1000 M Multi Group with 4 network groups on RL 4.5. We plan on upgrading this from IGS and the Moto processors. To Fiber and the P IV processors. My vendor tells me I need to have a certain revision of DDP cards. Can anybody provide me Nortel Documentation that states what...

I have done this but I had to take a way the ability to page over the phones and used an external paging system. I purchased a Bogen TAM B. It interfaces in between an analog phone port and the paging system. Once that is installed on an analog port anybody in your dialing plan can dial it, it...

We use Dameware to connect to all of our Nortel boxes Symposium, OTM, and CallPilot. Never had any issues with doing so.