Recent content by southside

Hi All, I have a quick question. I have been asked to redevelop a website for someone so they can move away from a website that restricts the number of web pages they have (or charge more if they want additional pages). I have completed all the work with the exception of a Contact me page. Can...

Hi All, I hav econfigured for a VPN Connection on a Pix 506E. This Pix sits within a Network so traffic is Nat'd out to a Public IP address and Internet. When I try to establish a VPN the ISAKMP Phase 1 is rejected because the Peer is set to the local PIX Outside IP address rather than the...

This has been moved to another subject as more information has been added.

Hi All, I have configured a Pix to Pix VPN and I am having problems. When I ping from a local machine, the VPN process is started and then finished. I have double-checked the configurations and I cannot see a problem. Any chance thes configurations and be looked at and checked over. I have...

Hi all, I have an issue with Pix to Pix VPN. I have configured my end to pat addresses 192.168.5.10-30 out on 172.30.6.232. I have Static Nat'd 192.168.5.2 to 172.30.6.231 (and vice versa). I have verified connectivity to the internet. Pix configuration works fine. Issues I have: VPN on...

Is it possible for anyone to tell me where I can get a basic or cheap Postcode Anywhere software. What I am looking at is software that users can enter in their own postcode and the result displays answers and the distance from their given location,like the Store Locators used by Retailers...

Hi All, I am using Software Version 7.0(4) on a Pix 525. On previous software versions I was able to run Packet debug on the Eth0 and Eth1 when troubleshooting. This feature seems to have been removed and now the closest I can get is the Capture command. This sends the debug to a log. Is...

I have a Pix 515E with a dead PSU. Does anybody know where I can purchase the PSU for this unit without replacing the whole thing? I have been informed that Cisco state they do not supply the PSU's on their own but I am checking on this. Thanks Adrian Jones

Thanks for the reply. I did have that feeling but I thought I would ask anyway. I went in and reset then trained the person concerned what to do in the future. Added fun to my daily routine though. Thanks agian. Adrian

One of my subordinates has changed the password on a Pix 515E and saved the cofiguration. He entered "enable mynewpassword encrypt" or "enable password mynewpassword encrypt" he cannot remember which. We are locked out of the Pix and I need to get access to make config changes urgently. I think...

Post your VPN config and it can be checked out.

Hi All, I have been looking at the Pix Vulnerability reported by Cisco - A remote user can cause TCP connections to be blocked. There is a work around which effectively is this: access-list tcp_inspection extended permit tcp any any access-list tcp_inspection extended deny ip any any...

Hi All, Apologies but I am fine with Pix but new to Routers (strange but true). I currently have a VPN link operational between two Pix 506e's. Due to DoS symptoms on one end of the VPN I need to install a router in front of the Pix. The other Pix has an ISP router in front of it at the...

I have three local websites at 192.168.0.1, 2 and 3. I have three URL's www.siteone.com, www.sitetwo.com and www.sitethree.com which all point to a single IP. I want Firewall-1 to redirect traffic to www.siteone.com to 192.168.0.1, sitetwo to .2 and sitethree to .3. I know it should be possible...

This is a strange problem we have here and advice is appreciated. We have a Pix 506e on a remote site that had been working without an issue. The Pix establishes a VPN link that tunnels through the local site backbone and gigamesh. A change was made to the Backbone switches to make them Layer...