Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by snight123

  1. snight123

    Sco 6 and Samba Printer

    HI, Sorry it was my typo. i was doing lp -d media /etc/hosts. But still nothing comes out.
  2. snight123

    Sco 6 and Samba Printer

    HI, I have created the printer as you suggested in Scoadmin --> Printers --> Printer manager, with the type as smbclient and port as /dev/null. I have then edited the created file in /var/spool/lp/admins/lp/interfaces and replaced server=pcname, service=sharename and password="-U...
  3. snight123

    ML370 Fan Control

    Hi, Thanks for the help. I got it sorted. Had to contact HP for the Tarball of the download as it was not available straight away. The link if anyone needs it is http://h18023.www1.hp.com/support/files/server/us/download/25903.html Thanks again, i can now hear myself think above this server. :-)
  4. snight123

    ML370 Fan Control

    Thanks, I'll download the support pack and see if it cures it. I think i may need the UnixWare pack rather than the Openserver 5.0.x one as i think Openserver 6 is based on Unixware 7. Thanks
  5. snight123

    ML370 Fan Control

    Hi, I have an ML370 G2 running Sco Openserver 6. The fans in the system are permenantly running at max speed. Do i need to configure the system so how so that once it is booted the fans slow down? Thanks
  6. snight123

    Sco 6 and Samba Printer

    Hi, I have managed to create the printers using the CUPS web administration page. However they dont appear in the Scoadmin --> Printers list, i can install them on my windows box and can print to it but cant print to them using lp -d media /etc/somefileorother. Is it possible to be able to...
  7. snight123

    Sco 6 and Samba Printer

    Hi, I have followed your instructions and i now have a printer called media. I have edited the file called "media" that it created in /usr/spool/lp/admins/lp/interfaces/ and put in the server, sharename etc but i still cant get anything out the printer. I must be missing something again. Is it...
  8. snight123

    Sco 6 and Samba Printer

    HI, Thanks for the info, although i'm not sure what to do next. What do i need to call the file that i copied into /usr/spool/lp/model? How do i create the printer? The printer is connected to a windows PC called "Media" and the printer is shared as "KYO1000". The only printers i've managed...
  9. snight123

    Unix to windows printing via samba?.

    Hi, If i find out, i'll post it up. Cheers
  10. snight123

    Unix to windows printing via samba?.

    HI, I'm also looking to see if this is possible. Did you get any help with this? Cheers
  11. snight123

    Samba Printing + Sco 6

    Hi, I have just got Sco 6 and need to set up some windows printers on the sco box. I used to use VisionFS on my 5.0.5 Box but as VisionFS is not available for Sco 6 in need an alternative. I have installed samba and the Sco box is visable in network neighbourhood on the windows boxes, I can...
  12. snight123

    Sco 6 and Samba Printer

    Hi, I have just got Sco 6 and need to set up some windows printers on the sco box. I used to use VisionFS on my 5.0.5 Box but as VisionFS is not available for Sco 6 in need an alternative. I have installed samba and the Sco box is visable in network neighbourhood on the windows boxes, I can...
  13. snight123

    ML330 Drive Bay Question

    Hi, Compaq/HP do a 2 Drive hot plug caddy which fits into two of the drive bays under the cd. Their part number is 258051-001. Hope this is what you were looking for. I use them in a SCO box and are just the trick.
  14. snight123

    Moving Printer Configuration

    HI, I have had a Sco 5.0.6 box for a few years now and visionfs is set up on it to print to multiple printers that are attached to the network by HP Jetdirect boxes. I now have a new Sco 6 box which i am using for development, what i want to do is to transfer the configurations of all the...
  15. snight123

    Mounting Another SCO Boxes filesystem

    Hi motoslide, Thanks for the information. I'll give it a go in the morning and see how i get on. Thanks
See more

Part and Inventory Search

Back
Top