Recent content by snailworks

I have an IBM @server xSeries 340 server with a RAID 5 array (Win2K Server). The server will not boot and I need to recover the data. I would like to know if it is possible to install the pci RAID controller and the drives into a working PC. I am assuming that the PC will recognize the array...

Tried that - received following msg: Selected extension list may not be deleted. It is being used by destination routes.

Is there a way to stop the Attendant Console from ringing on every incoming call? Thru the Auto Attendant, I want the console to ring only when it's hunt group is selected.

I cannot get internal paging to work to the phonesets. A user dials the paging extension (611) with no speakerphone output. Any suggestions an where to look for the problem / solution ??? -Gary

We have 3 locations all connected via Frame Relays to a central location with a Win2K Domain Controller running Active Directory. This network has been stable for 2+ years. A problem has begun recently where 2 of the branch locations cannot connect to Windows shares on the DC - although ALL IP...

I have 5 IBM Netvista A40 personal pc's; 4 at the office & 1 at home. 3 (2 office/1 home) have become unstable over past 4 weeks. Machines would lock up immediately following W2K splash or login. Antivirus is updated, machines are clean. No new software or hardware installs. I ran the F11...

Thanks again - I found on the Cisco TAC site info about the PIX-1FE and the chipsets - including the non-suported chip. I also found a number of internet sellers with this card for around $30 - $50.

Yes it does. Thank you.

No - The PIX515-R is shipped with 2 interfaces standard, but is licensed to have up to 3. If I wanted to exceed the limit of 3 and expand up to 6, I would then need to purchase the unrestricted license. I am looking to see if the Ethernet card is proprietary or generic?

How do I add ( or where do I get ) a 3rd ethernet interface to the PIX-515-R? I looked thru Cisco's site - nothing could be found. I am assuming that a standard NIC card will not work, right??? -Gary

I thought I understood this, but I need some clarification... I have a pair or domain servers with W2K Server and active directory. They each are running W2K DNS. (IP 10.0.0.2 & .3) I also have a pair of name servers running in the DMZ set up with the mydomoain.com records. (IP xxx.xxx.xxx.2 &...

I currently have 4 locations connected via Frac-T1 Frame Relays. At the central location, I have a Cisco 2621 (1 Serial & 2 FastEthernet(1 unused)). At this location, I am adding a DSL line for internet with a PIX 515 (2 FastEthernet). All 4 locations will share this DSL for Internet access. My...

I currently have a single Frame Relay to my main office that all WAN and Internet traffic share. I am dropping the Internet loop from that FR T1 and moving it to a DSL circuit. The PIX 515 will be on the new DSL, of course. My question is how many IP addresses do I need for NAT ? I have been...

I am a 'newbie' to PIX and have an issue as to where my PIX needs to be placed within our network. The original installer set it up in one manner and a consultant stated that it it wrong. With all of the reading I have done, I cannot seem to find a scenario or example that is similar to ours...

One of my users has a folder in the \domino\mail folder as hisusername.ft. This folder also contains a UNDX folder with numberoud ftgi000.* files. Any idea what this is or how it got here???