Recent content by smarksfrcb

Yes...I have two sups and I am in the Active one.

I have tried a few other baud rates an no luck. Still same result.

We just recieved a new Cisco 6513 Catalyst switch. I am trying to connect to it thru the Console port on the top Supervisor engine. I am trying both Hyperterminal and Putty. The following are the settings for the terminal • Bits per sec: 9600 • Data bits: 8 • Parity: none • Stop bits...

Thank you for the assistance For the most part yes, the extensions are the same as the DIDs but I have a couple that are routed to different extensions.... I can't remember the DISPLAY command to look at these mappings.

Hello, I have a lucent Definity G3Si Switch. I have a T1 coming in to my switch with multiple DID numbers on it. The DID numbers are automatically routed to an extension on the switch. For the life of me I can't remember the DISPLAY command to view the DID number to Extension routing.

Hello, I am wondering what the best practice for the following project I am working on. We have a Cisco 2811 series router with FE0/0(inside) and FE0/1 (Outside). FE0/1 has an external IP Address assigned and is a peer in a B2B VPN tunnel already to one of our clients networks (Riding over...

I have also just read an article that this may be a NAT issue...right now we have multiple pools configure as PAT (Overload)...it says I may need to configure a NAT pool with a 1/1 ratio using the internal ip address of the router....just wondering if this makes sense to anyone?

Yes...we have a DNS server now that is forwarding DNS requests to the same server I want to forward the router requests from and they pass fine.

One other piece of information to pass on is that if I add a name-server that is internal to my network this starts to work fine...would this confirm it is an ACL issue? Also, I have been reading something else that points to a possible NAT issue? thanks

This DNS server we are forwarding the queries to does not resolve external addresses, only internal addresses.

Hello, Sorry for the delay in replying and thank you for the help...would it be an ACL issue if I can resolve urls to ip addresses from a PC using NSLOOKUP with the server set as the same as what I have configured as the name servers on the router?

Hello, I have a Cisco 2811 Series Router. I want any dns queries sent to it to be forwarded to a dns server. Here is what I configured ip dns server ip name-servers 1.1.1.1 Ficticious ip ip domain-lookup if I try to traceroute to a url that I know is valid from the router telnet...

First I want to set the stage of what I have setup and then what I would like to accomplish I have a dns server called we will say dns1.abc.local . We have a vpn setup with one of your customers (we will say XYZ Co) where we access different urls thru the VPN. We have conditional forwarding...

Hello, I am having an issue with load balancing across my server farm when I have users accessing from the internet. To give a brief explanation of my setup (ficticious ips and machine names given) Machine Name IP ctxserver01 10.1.1.2 ctxserver02 10.1.1.3...

I am wondering if the following two Internet Options can be set via GPO. We are running Windows 2003 AD domain with Windows XP SP2 clients 1. Internet Options, General Tab, Temporary Internet Files Frame,Settings, Amount of Disk Space to Use 2. Internet Options, Privacy, Move the cookies...