Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by smab

  1. smab

    Password for WBM HG 3540

    For some reason the default doesn't work . Anyway I figured out how to change it using the same command I posted but I'm not sure if I can display it on the forum. I don't have access to the assistant so I cant try what sbcsu suggested. Thank you.
  2. smab

    Password for WBM HG 3540

    Greetings! The password to the web interface board is lost and I would like to restore access there. As I understand it, you can set password command CHANGE-STMIB: MTYPE = STMI2IGW, LTU = 2, SLOT = 9, TYPE = WBMDATA, LOG INWBM = "HP4K-DEVEL", PASSWWBM = ???, ROLE = ENGR; The question is...
  3. smab

    Call forward from attendant console , hipath 4000 v3

    All inbound calls on DID 2000 are set to reach the attendant console with ext 2030 , problem is when call forward is set on the console only internal calls are forwarded to the destination set , external inbound calls still ring at the attendant, ATNDDID ,ATND , VFGR , VFGKZ , NAVAR are all set...
  4. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    ok , got it working now, can transfer calls finally. Changing DNNO in richt and ldat to 1-1-90 was what got it working. Thanks to all for the support (specially Iamnothere). Now have to solve the problem in previous post.
  5. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    I will try with different COT values and see how it goes. There is another thing I was trying to achieve but with no success. We have 2 DPLN's 0 and 1 , Users have to press "9" to dial external numbers. When DPLN 0 is set user dials "9" enters an ID and then Is allowed to dial external numbers...
  6. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    Added the parameters , still cannot transfer . Here is a trace on the trunk and on a hipath station (2622). Monitor Trunk/Line/Data Line/ISDN Trace : -------------------------------------------------------------------------------- Static Information : Static Data: PEN 01-03-001-022 STNO...
  7. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    Managed to dial from Hipath to elastix , LCOSV=32 , but still transfer not possible...
  8. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    First of all thankyou for your explanation. Yes I'm sure about the transfer , I tried it using OptiGuide and flash on analog handsets and it was not possible. Stations are unique on the 2 sites , won't have to worry about that for now but it was good to know about the workaround for future...
  9. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    What i understood from "Iamnothere" post that DAR=TRNSKY does not sound correct , can you please confirm that TRNSKY , is the right option.Thanks
  10. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    True , there are other future codes beginning with "#" ,i wanted this as a temporary solution as i realized I can transfer the call by pressing "#" (attended call transfer code set in elastix, i get a dial tone from elastix) if the case was Elastix -> Hipath -> elastix. Can you suggest a...
  11. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    I will check as you suggested . I have a question a bit off topic , I would like for the users to transfer the call using the # key , I tried by ADD-WABE:CD=#,DAR=TRNSKY; but that didnt work . Thanks for your help.
  12. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    Here are the KNMAT entries.Please advice if i should alter. DISP-KNMAT:; H500: AMO KNMAT STARTED --------------------------------------------------------------------------- NODE MATRIX FOR NPI = UNKNOWN, LEVEL = 0...
  13. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    yes TTT is set.
  14. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    It's configured as DAR=TIE with access code 5 ( all elastix extensions are 5XXXX) . I read the other post but i cant transfer a call on the same trunk circuit. DISPLAY-TDCSU:PEN1=1-02-009-0; H500: AMO TDCSU STARTED +------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+...
  15. smab

    Siemens Hipath 4000v3 unable to perform trunk transfer to elastix

    We have a Hipath 4000v3 with a HG 3540/50 V2.0 card for sip trunking with an Elastix system . We can make calls between the systems but cannot transfer calls from the hipath to elastix ( not possible shows on screen) . We can transfer calls from the elastix to Hipath. Some of the scenarios I...
See more

Part and Inventory Search

Back
Top