Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by skot999
-
Static NAT problem
Yes, I can ping the firewall from the machine. Here is the route print from 192.168.1.144. Below that is the show xlate from the firewall. Thanks for all your help!!! IPv4 Route Table =========================================================================== Interface List 0x1... -
Static NAT problem
Actually no, this was the original problem... it appears there... but doesn't work. Also, when I add the internal ip to the machine the firewall doesn't even let me past it anymore. any ideas ? thoughts ? -
Static NAT problem
global (outside) 10 xxx.xxx.163.75-xxx.xxx.163.150 netmask 255.255.255.0 static (inside,outside) xxx.xxx.163.69 192.168.1.111 netmask 255.255.255.255 0 0 static (inside,outside) xxx.xxx.163.138 192.168.1.112 netmask 255.255.255.255 0 0 static (inside,outside) xxx.xxx.163.139 192.168.1.113... -
Static NAT problem
the outside address with the problem is xxx.xxx.163.230 - thanks for any help you give me. Building configuration... : Saved : PIX Version 6.3(1) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto shutdown nameif ethernet0 outside security0 nameif ethernet1 inside... -
Static NAT problem
I have a Cisco PIX 515e... and I have successfully used NAT from my private network to the internet without problems... except for 1 certain IP address. The private IP will not translate to this IP when going outside. I have tried changing the private IP a couple of times w/o success...and...
