Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by skbc

  1. skbc

    Interview time...

    thanks for the insight.
  2. skbc

    Interview time...

    Hey been a network engineer for about 6 years. I have an interview coming up next week. I did a preliminary interview and did well, but was told I would need to talk to RCDD standards in this next phased interview... not necessarily know it inside out. Any pointers on things of significance...
  3. skbc

    Colorado Nortel Option 11C...

    djwht... I found the LD(87) in the gob of books I have. I ended up using DN 55. I did this so I could utilize the same FLEN that was already in place. All works great!! I really appreciate all the help from each and every one of you guys. Ace, dj, big and john. I am going to push to go...
  4. skbc

    Colorado Nortel Option 11C...

    djwht, should I build two... one as 554 the other as 556, that way anything that goes out 554-XXXX or 556-XXXX goes out? thanks..
  5. skbc

    Colorado Nortel Option 11C...

    also... i'm almost sure they're all tied into RLI 3... which ld do i run to ensure that's what they are utilizing?
  6. skbc

    Colorado Nortel Option 11C...

    sorry for my ignorance... can you tell me the ld, etc... thank you very much
  7. skbc

    Colorado Nortel Option 11C...

    we used to utilize 4-XXXX, 2-XXXX and 6-XXXX for on base to on base dialing. all of those are config'd as DN 4 DN 2 DN 6 TYPE CDP TYPE CDP TYP CDP STCD DSC STCD DSC STCD DSC So I am assuming that config'ing DN 55 TYPE CDP STCD DSC would solve the...
  8. skbc

    Colorado Nortel Option 11C...

    you are right on with your question. We used to dial the last digit of our prefix (554-1000 = 4-1000) now they want us to dial 554-1000 and have eliminated 4-1000 capabilities.
  9. skbc

    Colorado Nortel Option 11C...

    I think it's 4. our AC2 is actually 94 for DSN or formerly Autovon for Military worldwide.
  10. skbc

    Colorado Nortel Option 11C...

    55 is showing unused currently since we got rid of call park. we used to dial 6-XXXX to access on base numbers. The DN 6 is set up as: DN 6 TYPE CDP STCD DSC I'd like ot utilize the unused DN 55 in the same fashion and see what it gives me. Don't know where to start. How would I implement...
  11. skbc

    Colorado Nortel Option 11C...

    how would I utilize a DN... I want to use 55 and config the way we used to use one of the DNs they used for the old 5 digit dialing.
  12. skbc

    Colorado Nortel Option 11C...

    is there a way to prt DN 50, other via DNB? And also, won't I have to know the TN before I can access spdn? thanks
  13. skbc

    Colorado Nortel Option 11C...

    misspoke... our DN are associated with TNs... the only DN's that don't have an association are 50-55. Those are the only ones with TYPE PARK. Everything else is TYPE 500. thanks
  14. skbc

    Colorado Nortel Option 11C...

    DNB shows DN 55 TYPE PARK I looked and the only thing that shows me how to dump a Park is to know the TN... well there is no TN associated with DN. Our switch is configured with ICM numbers which equate to our DN's(ex: 328 is associated with TN 15 3)... so how can I out DN 55. We noticed...
  15. skbc

    Colorado Nortel Option 11C...

    acewarlock.. think we may have stumbled upon something. Our mission was to use the straight 7 digit dialing scheme... that just so happened to include 554 and 556 prefixes. Looking at LD 20 and the DNB, we found that 55 is in call Park. How can I do away with that. I think this would enable...
See more

Part and Inventory Search

Back
Top